HL7 FHIR JP Core ImplementationGuide
1.2.0-dev - ci-build Japan flag

HL7 FHIR JP Core ImplementationGuide - Local Development build (v1.2.0-dev) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: JP_MedicationStatement_Injection - Detailed Descriptions

Draft as of 2022-07-04

Definitions for the jp-medicationstatement-injection resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationStatement
Definition

患者が薬剤を服用している状況についての情報である。

Short服薬情報
2. MedicationStatement.identifier
Definition

このインスタンスが外部から参照されるために使われるIDである。それ以外に任意のIDを付与してもよい。 このIDは業務手順によって定められた処方オーダーに対して、直接的なURL参照が適切でない場合も含めて関連付けるために使われる。この業務手順のIDは実施者によって割り当てられたものであり、リソースが更新されたりサーバからサーバに転送されたとしても固定のものとして存続する。

Short外部から参照されるID
Comments

これは業務IDであって、リソースに対するIDではない。

NoteThis is a business identifier, not a resource identifier (see discussion)
4. MedicationStatement.status
Definition

服薬状況のを示す。コード表: http://hl7.org/fhir/CodeSystem/medication-statement-status active | completed | entered-in-error |intended | stopped | on-hold | unknown | not-take

Comments

このエレメントはmodifierとされている。StatusとはこのResourceが現在妥当な状態ではないことも示すからである。

6. MedicationStatement.statusReason
Definition

現在の服薬状況を示す上記のstatusとなった理由

Short服薬状況の理由
Comments

コード化せずにtextのみで表現する。

8. MedicationStatement.category
Definition

薬剤が服用されると想定されている場所。日本では「院外」「院内」「入院」「外来」などの区分を想定する。 一般的には、外来や入院などどこでこの薬剤が投与、内服されるかを想定した区分である。 処方病棟や処方した診療科をOrganization resourceで表現することが冗長である場合にはこの区分が用いられることもある。 HL7 FHIRではvalue setとして http://terminology.hl7.org/CodeSystem/medicationrequest-category がデフォルトで用いられるが、日本での使用の場合持参薬をカバーする必要があり、JAHIS処方データ規約V3.0Cに記載されているMERIT-9処方オーダ表7とJHSP0007表を組み合わせて持ちいることとする

Short薬剤使用区分
10. MedicationStatement.medication[x]
Definition

Identifies the medication that was administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

投与された薬剤を識別する。既知の薬のリストから薬を識別するコード情報を設定する。

ShortWhat medication was supplied 医薬品
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

ひとつのtext要素と、複数のcoding 要素を記述できる。処方オーダ時に選択または入力し、実際に処方箋に印字される文字列を必ずtext要素に格納した上で、それをコード化した情報を1個以上のcoding 要素に記述する。

厚生労働省標準であるHOT9コード(販社指定が不要な場合にはHOT7コード)または広く流通しているYJコードを用いるか、一般名処方の場合には厚生労働省保険局一般名処方マスタのコードを使用して、Coding要素(コードsystemを識別するURI、医薬品のコード、そのコード表における医薬品の名称の3つからなる)で記述する。

なお、上記のいずれの標準的コードも付番されていない医薬品や医療材料の場合には、薬機法の下で使用されているGS1標準の識別コードであるGTIN(Global Trade Item Number)の調剤包装単位(最少包装単位、個別包装単位)14桁を使用する。

ひとつの処方薬、医療材料を複数のコード体系のコードで記述してもよく、その場合にcoding 要素を繰り返して記述する。 ただし、ひとつの処方薬を複数のコードで繰り返し記述する場合には、それらのコードが指し示す処方薬、医療材料は当然同一でなければならない。 また、処方を発行した医療機関内でのデータ利用のために、医療機関固有コード体系によるコード(ハウスコード、ローカルコード)の記述を含めてもよいが、その場合でも上述したいずれかの標準コードを同時に記述することが必要である。

TypeReference(JP Core Medication Profile), CodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
12. MedicationStatement.subject
Definition

JP Coreでは患者を表すPatientリソースへの参照。 一般には薬剤が投与される対象となる患者を表現するPatient Resourceに対するリンク。

Short処方箋が発行された患者に対する参照
Comments

処方オーダーの対象は必須項目である。 二次利用のためにどこに実際の対象がいるのかについての情報は提供されない。特定の対象に対して匿名化することも必要である。

TypeReference(JP Core Patient Profile)
14. MedicationStatement.effective[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
SlicingThis element introduces a set of slices on MedicationStatement.effective[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 16. MedicationStatement.effective[x]:effectivePeriod
    Slice NameeffectivePeriod
    Definition

    薬が服用される期間

    Short服薬期間
    Control0..1
    TypePeriod
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    18. MedicationStatement.effective[x]:effectivePeriod.start
    Definition

    薬の服用を開始した日

    Short開始日
    20. MedicationStatement.effective[x]:effectivePeriod.end
    Definition

    薬の服用を終了する日

    Short終了日
    Comments

    この値は必ず境界日を含む。2012-02-03T10:00:00は2012-02-03を終了時刻(end)の値とする期間を示す。

    22. MedicationStatement.dateAsserted
    Definition

    情報源となったインスタンスでこのステートメントが言明された日

    Shortこのステートメントが言明された日
    24. MedicationStatement.informationSource
    Definition

    この服用状況についての情報を提供した人物あるいは組織についての参照

    Shortこの服用状況についての情報を提供した人物あるいは組織についての参照
    26. MedicationStatement.derivedFrom
    Definition

    MedicationStatementリソースと関連するMedicationRequestやその他の支持情報を表すリソースと関連付けられるようにする。

    Shortその他の支持情報
    28. MedicationStatement.reasonCode
    Definition

    この薬剤た投与された理由

    Shortこの投薬の理由。対象疾患
    Comments

    このコードは疾患分類であっても良い。JP Coreでは傷病名マスターの使用を前提とする。

    30. MedicationStatement.reasonCode.coding
    Short投与理由,対象疾患についてのコード
    32. MedicationStatement.reasonReference
    Short服薬理由を支持するObservation, Condition, DiagnosticReportについての参照。
    34. MedicationStatement.note
    Definition

    他の属性には記載できないこのstatementについての備考情報

    Short他のフィールドには記述できないこのstatementについての追加情報
    36. MedicationStatement.dosage
    Definition

    患者にこの薬剤がどのように服用すべきかを示す情報

    Shortこの薬剤がどのように服用されたのか,服用すべきだったのかを示す情報
    TypeDosage(JP Core MedicationDosage Injection DataType)
    38. MedicationStatement.dosage.extension:rateComment
    Slice NamerateComment
    Control0..*
    TypeExtension(JP Core Medication Dosage RateComment Extension) (Extension Type: Choice of: string, CodeableConcept)

    Guidance on how to interpret the contents of this table can be found here

    0. MedicationStatement
    Definition

    患者が薬剤を服用している状況についての情報である。


    患者によって消費されている薬の記録。投薬手段は、患者が今すぐ薬を服用しているか、過去に薬を服用しているか、将来薬を服用していることを示している可能性があります。この情報の原因は、患者、重要な他の人(家族や配偶者など)、または臨床医である可能性があります。この情報がキャプチャされる一般的なシナリオは、患者の訪問または滞在中に歴史の中でプロセスを取ることです。投薬情報は、患者の記憶、処方箋ボトル、患者、臨床医、または他の当事者が維持している薬物のリストからの情報源から得られる場合があります。

    投薬声明と投薬診断の主な違いは、投薬投与が完全な投与情報を持ち、薬を投与した人からの実際の投与情報に基づいていることです。薬の声明は、常にではないにしても、具体的ではないことがよくあります。薬が投与されたときに必要な日付/時刻はありません。実際、患者がこの薬を服用していると報告していることがわかりました。あまり正確ではありません。前述のように、投薬声明の情報は、患者の記憶、処方箋ボトル、または患者、臨床医、または他の当事者が維持している薬物のリストから得られる可能性があります。投薬投与はより正式であり、詳細な情報を見逃していません。 / A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

    The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

    Short服薬情報患者が服用している薬の記録 / Record of medication being taken by a patient
    Comments

    薬物測定を解釈するとき、ステータスの価値とNottakenを考慮する必要があります。 dedicationStatement.status + decutionStatement.wasnottaken ステータス=アクティブ + nottaken = t =現在取得していない ステータス=完了 + nottaken = t =過去に撮影されていない status = dented + nottaken = t =取得する意図はありません ステータス=アクティブ + nottaken = f =撮影ですが、規定されていない ステータス=アクティブ + nottaken = f =撮影 status = dented +nottaken = f =は取得されます(開始されません) ステータス=完了 + nottaken = f =過去に撮影 status = in error + nottaken = n/a =エラー。 / When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
    2. MedicationStatement.implicitRules
    Definition

    リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
    Comments

    このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. MedicationStatement.modifierExtension
    Definition

    リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

    モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    Short無視できない拡張機能 / Extensions that cannot be ignored
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. MedicationStatement.identifier
    Definition

    このインスタンスが外部から参照されるために使われるIDである。それ以外に任意のIDを付与してもよい。 このIDは業務手順によって定められた処方オーダーに対して、直接的なURL参照が適切でない場合も含めて関連付けるために使われる。この業務手順のIDは実施者によって割り当てられたものであり、リソースが更新されたりサーバからサーバに転送されたとしても固定のものとして存続する。


    ビジネスプロセスによって定義されるこの薬物療法ステートメントに関連付けられた識別子、および/またはリソース自体への直接のURL参照が適切でない場合にそれを参照するために使用される識別子。これらは、パフォーマーまたは他のシステムによってこのリソースに割り当てられたビジネス識別子であり、リソースが更新され、サーバーからサーバーに伝播するため、一定のままです。 / Identifiers associated with this Medication Statement that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

    Short外部から参照されるID外部識別子 / External identifier
    Comments

    これは業務IDであって、リソースに対するIDではない。


    これはビジネス識別子であり、リソース識別子ではありません。 / This is a business identifier, not a resource identifier.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. MedicationStatement.status
    Definition

    服薬状況のを示す。コード表: http://hl7.org/fhir/CodeSystem/medication-statement-status active | completed | entered-in-error |intended | stopped | on-hold | unknown | not-take


    この声明が存在すると使用されている薬の状態に関する患者または他のソースの判断を表すコード。通常、これはアクティブまたは完了します。 / A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed.

    Shortアクティブ|完了|エラーに入った|意図した|停止|オンホールド|不明|非テイク / active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
    Comments

    このエレメントはmodifierとされている。StatusとはこのResourceが現在妥当な状態ではないことも示すからである。


    薬物測定は、ある時点での声明です。ステータスは、主張された時点でのみ代表です。settatement.Statusに設定された値には、患者による投薬の使用状況を主張するコード(たとえば、停止または保留中)と、薬物声明自体の状態を主張するコード(たとえば、エラー)。

    この要素は、リソースを現在有効ではないとマークするコードが含まれているため、修飾子としてラベル付けされています。 / MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error).

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from Medication Status Codeshttp://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1)

    薬剤の現在の状態を示すコード化された概念。 / A coded concept indicating the current status of a MedicationStatement.

    Typecode
    Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. MedicationStatement.statusReason
    Definition

    現在の服薬状況を示す上記のstatusとなった理由


    薬物測定の現在の状態の理由を捉えています。 / Captures the reason for the current state of the MedicationStatement.

    Short服薬状況の理由現在のステータスの理由 / Reason for current status
    Comments

    コード化せずにtextのみで表現する。


    通常、これは、「非テイク」、「オンホールド」、「キャンセル」、「エラーに入った」などの「例外」ステータスにのみ使用されます。イベントを実行する理由は、ここではなくReasonCodeでキャプチャされます。 / This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

    Control0..*
    BindingFor example codes, see SNOMEDCTDrugTherapyStatusCodeshttp://hl7.org/fhir/ValueSet/reason-medication-status-codes
    (example to http://hl7.org/fhir/ValueSet/reason-medication-status-codes)

    ステートメントのステータスの理由を示すコード化された概念。 / A coded concept indicating the reason for the status of the statement.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. MedicationStatement.category
    Definition

    薬剤が服用されると想定されている場所。日本では「院外」「院内」「入院」「外来」などの区分を想定する。 一般的には、外来や入院などどこでこの薬剤が投与、内服されるかを想定した区分である。 処方病棟や処方した診療科をOrganization resourceで表現することが冗長である場合にはこの区分が用いられることもある。 HL7 FHIRではvalue setとして http://terminology.hl7.org/CodeSystem/medicationrequest-category がデフォルトで用いられるが、日本での使用の場合持参薬をカバーする必要があり、JAHIS処方データ規約V3.0Cに記載されているMERIT-9処方オーダ表7とJHSP0007表を組み合わせて持ちいることとする


    薬が消費または投与されることが予想される場所を示します。 / Indicates where the medication is expected to be consumed or administered.

    Short薬剤使用区分薬の使用の種類 / Type of medication usage
    Control0..1
    BindingThe codes SHOULD be taken from Medication usage category codeshttp://hl7.org/fhir/ValueSet/medication-statement-category
    (preferred to http://hl7.org/fhir/ValueSet/medication-statement-category)

    薬剤が含まれている場所を識別するコード化された概念は、薬物測定に含まれる場所が消費または投与されると予想されます。 / A coded concept identifying where the medication included in the MedicationStatement is expected to be consumed or administered.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. MedicationStatement.medication[x]
    Definition

    Identifies the medication that was administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

    投与された薬剤を識別する。既知の薬のリストから薬を識別するコード情報を設定する。


    投与されている薬を特定します。これは、薬物の詳細を表すリソースへのリンクか、既知の薬物のリストから薬を識別するコードを運ぶ単純な属性です。 / Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

    ShortWhat medication was supplied 医薬品どの薬を服用したか / What medication was taken
    Comments

    If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

    ひとつのtext要素と、複数のcoding 要素を記述できる。処方オーダ時に選択または入力し、実際に処方箋に印字される文字列を必ずtext要素に格納した上で、それをコード化した情報を1個以上のcoding 要素に記述する。

    厚生労働省標準であるHOT9コード(販社指定が不要な場合にはHOT7コード)または広く流通しているYJコードを用いるか、一般名処方の場合には厚生労働省保険局一般名処方マスタのコードを使用して、Coding要素(コードsystemを識別するURI、医薬品のコード、そのコード表における医薬品の名称の3つからなる)で記述する。

    なお、上記のいずれの標準的コードも付番されていない医薬品や医療材料の場合には、薬機法の下で使用されているGS1標準の識別コードであるGTIN(Global Trade Item Number)の調剤包装単位(最少包装単位、個別包装単位)14桁を使用する。

    ひとつの処方薬、医療材料を複数のコード体系のコードで記述してもよく、その場合にcoding 要素を繰り返して記述する。 ただし、ひとつの処方薬を複数のコードで繰り返し記述する場合には、それらのコードが指し示す処方薬、医療材料は当然同一でなければならない。 また、処方を発行した医療機関内でのデータ利用のために、医療機関固有コード体系によるコード(ハウスコード、ローカルコード)の記述を含めてもよいが、その場合でも上述したいずれかの標準コードを同時に記述することが必要である。


    コードのみが指定されている場合、特定の製品のコードである必要があります。より多くの情報が必要な場合は、投薬リソースの使用をお勧めします。たとえば、フォームまたはロット番号が必要な場合は、投薬リソースを参照する必要があります。 / If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

    Control1..1
    TypeReference(JP Core Medication Profile, Medication), CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. MedicationStatement.subject
    Definition

    JP Coreでは患者を表すPatientリソースへの参照。 一般には薬剤が投与される対象となる患者を表現するPatient Resourceに対するリンク。


    薬を服用している人、動物、またはグループ。 / The person, animal or group who is/was taking the medication.

    Short処方箋が発行された患者に対する参照誰が薬を服用していたのか / Who is/was taking the medication
    Comments

    処方オーダーの対象は必須項目である。 二次利用のためにどこに実際の対象がいるのかについての情報は提供されない。特定の対象に対して匿名化することも必要である。

    Control1..1
    TypeReference(JP Core Patient Profile, Patient, Group)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. MedicationStatement.effective[x]
    Definition

    患者が薬を服用している/服用している/(または薬を服用していなかった)と主張されている時間の間隔。 / The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

    Short薬が服用/服用/服用/時刻または間隔 / The date/time or interval when the medication is/was/will be taken
    Comments

    この属性は、患者が投薬を消費した期間を反映しており、投薬声明の大部分に埋め込むことが期待されています。声明が記録された時点で薬がまだ撮影されている場合、「終了」日付は省略されます。日付/時刻属性は、年、年/月、正確な日付のさまざまな日付をサポートしています。これ以上のものが必要な場合は、これをテキストとして伝える必要があります。 / This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

    Control0..1
    TypeChoice of: dateTime, Period
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on MedicationStatement.effective[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 20. MedicationStatement.effective[x]:effectivePeriod
      Slice NameeffectivePeriod
      Definition

      薬が服用される期間


      患者が薬を服用している/服用している/(または薬を服用していなかった)と主張されている時間の間隔。 / The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

      Short服薬期間薬が服用/服用/服用/時刻または間隔 / The date/time or interval when the medication is/was/will be taken
      Comments

      この属性は、患者が投薬を消費した期間を反映しており、投薬声明の大部分に埋め込むことが期待されています。声明が記録された時点で薬がまだ撮影されている場合、「終了」日付は省略されます。日付/時刻属性は、年、年/月、正確な日付のさまざまな日付をサポートしています。これ以上のものが必要な場合は、これをテキストとして伝える必要があります。 / This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

      Control0..1
      TypePeriod, dateTime
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. MedicationStatement.effective[x]:effectivePeriod.start
      Definition

      薬の服用を開始した日


      期間の始まり。境界は包括的です。 / The start of the period. The boundary is inclusive.

      Short開始日包括的境界で開始時間 / Starting time with inclusive boundary
      Comments

      低要素が欠落している場合、意味は低い境界が知られていないことです。 / If the low element is missing, the meaning is that the low boundary is not known.

      Control0..1
      This element is affected by the following invariants: per-1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. MedicationStatement.effective[x]:effectivePeriod.end
      Definition

      薬の服用を終了する日


      期間の終わり。期間の終了が欠落している場合、インスタンスが作成された時点で終了がわかっていないか、計画されていないことを意味します。スタートは過去の可能性があり、将来の終了日です。つまり、その期間はその時点で終了すると予想される/計画されています。 / The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

      Short終了日継続していない場合、包括的境界で終了時間 / End time with inclusive boundary, if not ongoing
      Comments

      この値は必ず境界日を含む。2012-02-03T10:00:00は2012-02-03を終了時刻(end)の値とする期間を示す。


      高い値には、一致する日付/時間が含まれます。つまり、2012-02-03T10:00:00は、2012-02-03の終了値を持つ期間です。 / The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

      Control0..1
      This element is affected by the following invariants: per-1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Meaning if Missing期間の終了が欠落している場合、それは期間が進行中であることを意味します / If the end of the period is missing, it means that the period is ongoing
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. MedicationStatement.dateAsserted
      Definition

      情報源となったインスタンスでこのステートメントが言明された日


      投薬声明が情報源によって主張された日付。 / The date when the medication statement was asserted by the information source.

      Shortこのステートメントが言明された日声明が主張されたのはいつですか? / When the statement was asserted?
      Control0..1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. MedicationStatement.informationSource
      Definition

      この服用状況についての情報を提供した人物あるいは組織についての参照


      この薬の服用に関する情報を提供した個人または組織。注:薬物測定が他のリソースから派生したときに派生したものを使用します。請求または薬。 / The person or organization that provided the information about the taking of this medication. Note: Use derivedFrom when a MedicationStatement is derived from other resources, e.g. Claim or MedicationRequest.

      Shortこの服用状況についての情報を提供した人物あるいは組織についての参照この薬の服用に関する情報を提供した人または組織 / Person or organization that provided the information about the taking of this medication
      Control0..1
      TypeReference(Patient, Practitioner, PractitionerRole, RelatedPerson, Organization)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. MedicationStatement.derivedFrom
      Definition

      MedicationStatementリソースと関連するMedicationRequestやその他の支持情報を表すリソースと関連付けられるようにする。


      薬物測定を基礎となる薬物療法、または薬剤の導出にサポートまたは使用する他の情報にリンクすることができます。 / Allows linking the MedicationStatement to the underlying MedicationRequest, or to other information that supports or is used to derive the MedicationStatement.

      Shortその他の支持情報追加のサポート情報 / Additional supporting information
      Comments

      おそらく参考文献は、薬物療法、薬剤、請求、観察、またはアンケート担当者に関するものです。薬物測定を導き出すための最も一般的なユースケースは、薬物療法または実験室の観察または請求からの薬物測定の作成に由来しています。利用可能な情報の量は、投薬手段を導き出すタイプリソースから異なることに注意する必要があります。 / Likely references would be to MedicationRequest, MedicationDispense, Claim, Observation or QuestionnaireAnswers. The most common use cases for deriving a MedicationStatement comes from creating a MedicationStatement from a MedicationRequest or from a lab observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the MedicationStatement from.

      Control0..*
      TypeReference(Resource)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. MedicationStatement.reasonCode
      Definition

      この薬剤た投与された理由


      薬が服用されている理由の理由。 / A reason for why the medication is being/was taken.

      Shortこの投薬の理由。対象疾患薬が服用されている理由の理由 / Reason for why the medication is being/was taken
      Comments

      このコードは疾患分類であっても良い。JP Coreでは傷病名マスターの使用を前提とする。


      これは診断コードである可能性があります。完全な状態レコードが存在する場合、または追加の詳細が必要な場合は、ReasonForUseReferenceを使用してください。 / This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonForUseReference.

      Control0..*
      BindingFor example codes, see Condition/Problem/DiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
      (example to http://hl7.org/fhir/ValueSet/condition-code)

      薬が服用されている理由を特定するコード化された概念。 / A coded concept identifying why the medication is being taken.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. MedicationStatement.reasonCode.coding
      Definition

      用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

      Short投与理由,対象疾患についてのコード用語システムによって定義されたコード / Code defined by a terminology system
      Comments

      コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. MedicationStatement.reasonReference
      Definition

      薬が摂取されている理由をサポートする状態または観察。 / Condition or observation that supports why the medication is being/was taken.

      Short服薬理由を支持するObservation, Condition, DiagnosticReportについての参照。薬が服用されている理由をサポートする状態または観察 / Condition or observation that supports why the medication is being/was taken
      Comments

      これは、薬が服用されている/服用されている理由である状態への言及です。コードのみが存在する場合は、ReasonForUseCodeを使用してください。 / This is a reference to a condition that is the reason why the medication is being/was taken. If only a code exists, use reasonForUseCode.

      Control0..*
      TypeReference(Condition, Observation, DiagnosticReport)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. MedicationStatement.note
      Definition

      他の属性には記載できないこのstatementについての備考情報


      他の属性によって伝えられない薬物声明に関する追加の情報を提供します。 / Provides extra information about the medication statement that is not conveyed by the other attributes.

      Short他のフィールドには記述できないこのstatementについての追加情報声明の詳細情報 / Further information about the statement
      Control0..*
      TypeAnnotation
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. MedicationStatement.dosage
      Definition

      患者にこの薬剤がどのように服用すべきかを示す情報


      患者が薬物療法がどのように摂取されたか、または摂取されるべきかを示します。 / Indicates how the medication is/was or should be taken by the patient.

      Shortこの薬剤がどのように服用されたのか,服用すべきだったのかを示す情報薬がどのように服用されたか、または服用されるべきかの詳細 / Details of how medication is/was taken or should be taken
      Comments

      投薬声明の投与量に含まれる日付は、特定の用量の日付を反映しています。たとえば、「2016年11月1日から2016年11月3日まで、毎日1錠を服用し、2016年11月4日から2016年11月7日まで、毎日2錠を服用してください。」この特異性は、患者が標識容器を持ち込む場合、または薬物療法の声明が薬物療法に由来する場合にのみ居住することが予想されます。 / The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

      Control0..*
      TypeDosage(JP Core MedicationDosage Injection DataType)
      Is Modifierfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. MedicationStatement.dosage.extension:dosageComment
      Slice NamedosageComment
      Definition

      用法コメントを格納するための拡張

      Short用法コメント
      Control0..*
      TypeExtension(JP Core Medication Dosage DosageComment Extension) (Extension Type: Choice of: string, CodeableConcept)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      44. MedicationStatement.dosage.extension:device
      Slice Namedevice
      Definition

      投与装置を格納する拡張

      Short投与装置
      Control0..*
      TypeExtension(JP Core Medication Dosage Device Extension) (Extension Type: Reference(Device))
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      46. MedicationStatement.dosage.extension:line
      Slice Nameline
      Definition

      指示ラインを格納する拡張

      Short指示ライン
      Control0..*
      TypeExtension(JP Core Medication Dosage Line Extension) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      48. MedicationStatement.dosage.extension:lineComment
      Slice NamelineComment
      Definition

      ラインコメントを格納するための拡張

      Shortラインコメント
      Control0..*
      TypeExtension(JP Core Medication Dosage LineComment Extension) (Extension Type: Choice of: string, CodeableConcept)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      50. MedicationStatement.dosage.extension:rateComment
      Slice NamerateComment
      Definition

      投与速度コメントを格納するための拡張

      Short投与速度コメント
      Control0..*
      TypeExtension(JP Core Medication Dosage RateComment Extension) (Extension Type: Choice of: string, CodeableConcept)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      52. MedicationStatement.dosage.modifierExtension
      Definition

      要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

      モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
      Comments

      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())

      Guidance on how to interpret the contents of this table can be found here

      0. MedicationStatement
      Definition

      患者が薬剤を服用している状況についての情報である。

      Short服薬情報
      Comments

      薬物測定を解釈するとき、ステータスの価値とNottakenを考慮する必要があります。 dedicationStatement.status + decutionStatement.wasnottaken ステータス=アクティブ + nottaken = t =現在取得していない ステータス=完了 + nottaken = t =過去に撮影されていない status = dented + nottaken = t =取得する意図はありません ステータス=アクティブ + nottaken = f =撮影ですが、規定されていない ステータス=アクティブ + nottaken = f =撮影 status = dented +nottaken = f =は取得されます(開始されません) ステータス=完了 + nottaken = f =過去に撮影 status = in error + nottaken = n/a =エラー。 / When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
      2. MedicationStatement.id
      Definition

      リソースのURLで使用されるリソースの論理ID。割り当てられたら、この値は変更されません。 / The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      Shortこのアーティファクトの論理ID / Logical id of this artifact
      Comments

      リソースにIDがないのは、IDが作成操作を使用してサーバーに送信されている場合です。 / The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. MedicationStatement.meta
      Definition

      リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      Shortリソースに関するメタデータ / Metadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. MedicationStatement.implicitRules
      Definition

      リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
      Comments

      このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. MedicationStatement.language
      Definition

      リソースが書かれている基本言語。 / The base language in which the resource is written.

      Shortリソースコンテンツの言語 / Language of the resource content
      Comments

      言語は、インデックス作成とアクセシビリティをサポートするために提供されます(通常、テキストから音声までのサービスなどのサービスが言語タグを使用します)。叙述(Narative)のHTML言語タグは、叙述(Narative)に適用されます。リソース上の言語タグを使用して、リソース内のデータから生成された他のプレゼンテーションの言語を指定できます。すべてのコンテンツが基本言語である必要はありません。リソース。言語は、叙述(Narative)に自動的に適用されると想定されるべきではありません。言語が指定されている場合、HTMLのDIV要素にも指定されている場合(XML:LangとHTML Lang属性の関係については、HTML5のルールを参照してください)。 / Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      人間の言語。 / A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. MedicationStatement.text
      Definition

      リソースの概要を含み、人間へのリソースの内容を表すために使用できる人間の読み取り可能な叙述(Narative)。叙述(Narative)はすべての構造化されたデータをエンコードする必要はありませんが、人間が叙述(Narative)を読むだけで「臨床的に安全」にするために十分な詳細を含める必要があります。リソースの定義は、臨床的安全を確保するために、叙述(Narative)で表現するコンテンツを定義する場合があります。 / A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      Short人間の解釈のためのリソースのテキスト概要 / Text summary of the resource, for human interpretation
      Comments

      含まれるリソースには叙述(Narative)がありません。含まれていないリソースには叙述(Narative)が必要です。場合によっては、リソースには、追加の個別のデータがほとんどまたはまったくないテキストのみがあります(すべてのMinoccur = 1要素が満たされている限り)。これは、情報がtext blob (バイナリー ラージ オブジェクト)としてキャプチャされるレガシーシステムからのデータ、またはテキストが生またはナレーションされ、エンコードされた情報が後で追加される場合に必要になる場合があります。 / Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. MedicationStatement.contained
      Definition

      これらのリソースには、それらを含むリソースを除いて独立した存在はありません - 独立して特定することはできず、独自の独立したトランザクションスコープを持つこともできません。 / These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      Shortインラインリソースが含まれています / Contained, inline Resources
      Comments

      識別が失われると、コンテンツを適切に識別できる場合は、これを行うべきではありません。含まれるリソースには、メタ要素にプロファイルとタグがある場合がありますが、セキュリティラベルはありません。 / This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. MedicationStatement.extension
      Definition

      リソースの基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      Short実装で定義された追加のコンテンツ / Additional content defined by implementations
      Comments

      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. MedicationStatement.modifierExtension
      Definition

      リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

      モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      Short無視できない拡張機能 / Extensions that cannot be ignored
      Comments

      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. MedicationStatement.identifier
      Definition

      このインスタンスが外部から参照されるために使われるIDである。それ以外に任意のIDを付与してもよい。 このIDは業務手順によって定められた処方オーダーに対して、直接的なURL参照が適切でない場合も含めて関連付けるために使われる。この業務手順のIDは実施者によって割り当てられたものであり、リソースが更新されたりサーバからサーバに転送されたとしても固定のものとして存続する。

      Short外部から参照されるID
      Comments

      これは業務IDであって、リソースに対するIDではない。

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. MedicationStatement.basedOn
      Definition

      このイベントによって全体または一部に満たされる計画、提案、または命令。 / A plan, proposal or order that is fulfilled in whole or in part by this event.

      Short計画、提案、または命令を満たします / Fulfils plan, proposal or order
      Control0..*
      TypeReference(MedicationRequest, CarePlan, ServiceRequest)
      Is Modifierfalse
      Summarytrue
      Requirements

      イベントの許可を追跡し、提案/勧告が行われたかどうかを追跡することができます。 / Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. MedicationStatement.partOf
      Definition

      この特定のイベントがコンポーネントまたはステップであるより大きなイベント。 / A larger event of which this particular event is a component or step.

      Short参照イベントの一部 / Part of referenced event
      Control0..*
      TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Observation)
      Is Modifierfalse
      Summarytrue
      Requirements

      これは、薬物測定がどのリソースから導出されているかを示す場合は使用しないでください。それがユースケースである場合、secticationStatement.derivedfromを使用する必要があります。 / This should not be used when indicating which resource a MedicationStatement has been derived from. If that is the use case, then MedicationStatement.derivedFrom should be used.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. MedicationStatement.status
      Definition

      服薬状況のを示す。コード表: http://hl7.org/fhir/CodeSystem/medication-statement-status active | completed | entered-in-error |intended | stopped | on-hold | unknown | not-take

      Shortアクティブ|完了|エラーに入った|意図した|停止|オンホールド|不明|非テイク / active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
      Comments

      このエレメントはmodifierとされている。StatusとはこのResourceが現在妥当な状態ではないことも示すからである。

      Control1..1
      BindingThe codes SHALL be taken from Medication Status Codes
      (required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1)

      薬剤の現在の状態を示すコード化された概念。 / A coded concept indicating the current status of a MedicationStatement.

      Typecode
      Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. MedicationStatement.statusReason
      Definition

      現在の服薬状況を示す上記のstatusとなった理由

      Short服薬状況の理由
      Comments

      コード化せずにtextのみで表現する。

      Control0..*
      BindingFor example codes, see SNOMEDCTDrugTherapyStatusCodes
      (example to http://hl7.org/fhir/ValueSet/reason-medication-status-codes)

      ステートメントのステータスの理由を示すコード化された概念。 / A coded concept indicating the reason for the status of the statement.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. MedicationStatement.category
      Definition

      薬剤が服用されると想定されている場所。日本では「院外」「院内」「入院」「外来」などの区分を想定する。 一般的には、外来や入院などどこでこの薬剤が投与、内服されるかを想定した区分である。 処方病棟や処方した診療科をOrganization resourceで表現することが冗長である場合にはこの区分が用いられることもある。 HL7 FHIRではvalue setとして http://terminology.hl7.org/CodeSystem/medicationrequest-category がデフォルトで用いられるが、日本での使用の場合持参薬をカバーする必要があり、JAHIS処方データ規約V3.0Cに記載されているMERIT-9処方オーダ表7とJHSP0007表を組み合わせて持ちいることとする

      Short薬剤使用区分
      Control0..1
      BindingThe codes SHOULD be taken from Medication usage category codes
      (preferred to http://hl7.org/fhir/ValueSet/medication-statement-category)

      薬剤が含まれている場所を識別するコード化された概念は、薬物測定に含まれる場所が消費または投与されると予想されます。 / A coded concept identifying where the medication included in the MedicationStatement is expected to be consumed or administered.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. MedicationStatement.medication[x]
      Definition

      Identifies the medication that was administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

      投与された薬剤を識別する。既知の薬のリストから薬を識別するコード情報を設定する。

      ShortWhat medication was supplied 医薬品
      Comments

      If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

      ひとつのtext要素と、複数のcoding 要素を記述できる。処方オーダ時に選択または入力し、実際に処方箋に印字される文字列を必ずtext要素に格納した上で、それをコード化した情報を1個以上のcoding 要素に記述する。

      厚生労働省標準であるHOT9コード(販社指定が不要な場合にはHOT7コード)または広く流通しているYJコードを用いるか、一般名処方の場合には厚生労働省保険局一般名処方マスタのコードを使用して、Coding要素(コードsystemを識別するURI、医薬品のコード、そのコード表における医薬品の名称の3つからなる)で記述する。

      なお、上記のいずれの標準的コードも付番されていない医薬品や医療材料の場合には、薬機法の下で使用されているGS1標準の識別コードであるGTIN(Global Trade Item Number)の調剤包装単位(最少包装単位、個別包装単位)14桁を使用する。

      ひとつの処方薬、医療材料を複数のコード体系のコードで記述してもよく、その場合にcoding 要素を繰り返して記述する。 ただし、ひとつの処方薬を複数のコードで繰り返し記述する場合には、それらのコードが指し示す処方薬、医療材料は当然同一でなければならない。 また、処方を発行した医療機関内でのデータ利用のために、医療機関固有コード体系によるコード(ハウスコード、ローカルコード)の記述を含めてもよいが、その場合でも上述したいずれかの標準コードを同時に記述することが必要である。

      Control1..1
      TypeReference(JP Core Medication Profile)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. MedicationStatement.subject
      Definition

      JP Coreでは患者を表すPatientリソースへの参照。 一般には薬剤が投与される対象となる患者を表現するPatient Resourceに対するリンク。

      Short処方箋が発行された患者に対する参照
      Comments

      処方オーダーの対象は必須項目である。 二次利用のためにどこに実際の対象がいるのかについての情報は提供されない。特定の対象に対して匿名化することも必要である。

      Control1..1
      TypeReference(JP Core Patient Profile)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. MedicationStatement.context
      Definition

      この薬物測定のコンテキストを確立する遭遇またはケアのエピソード。 / The encounter or episode of care that establishes the context for this MedicationStatement.

      Short薬物測定に関連する遭遇 /エピソード / Encounter / Episode associated with MedicationStatement
      Control0..1
      TypeReference(Encounter, EpisodeOfCare)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. MedicationStatement.effective[x]
      Definition

      患者が薬を服用している/服用している/(または薬を服用していなかった)と主張されている時間の間隔。 / The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

      Short薬が服用/服用/服用/時刻または間隔 / The date/time or interval when the medication is/was/will be taken
      Comments

      この属性は、患者が投薬を消費した期間を反映しており、投薬声明の大部分に埋め込むことが期待されています。声明が記録された時点で薬がまだ撮影されている場合、「終了」日付は省略されます。日付/時刻属性は、年、年/月、正確な日付のさまざまな日付をサポートしています。これ以上のものが必要な場合は、これをテキストとして伝える必要があります。 / This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

      Control0..1
      TypeChoice of: dateTime, Period
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on MedicationStatement.effective[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 38. MedicationStatement.effective[x]:effectivePeriod
        Slice NameeffectivePeriod
        Definition

        薬が服用される期間

        Short服薬期間
        Comments

        この属性は、患者が投薬を消費した期間を反映しており、投薬声明の大部分に埋め込むことが期待されています。声明が記録された時点で薬がまだ撮影されている場合、「終了」日付は省略されます。日付/時刻属性は、年、年/月、正確な日付のさまざまな日付をサポートしています。これ以上のものが必要な場合は、これをテキストとして伝える必要があります。 / This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

        Control0..1
        TypePeriod
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. MedicationStatement.effective[x]:effectivePeriod.id
        Definition

        リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Short要素間参照のための一意のID / Unique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        42. MedicationStatement.effective[x]:effectivePeriod.extension
        Definition

        要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        Short実装で定義された追加のコンテンツ / Additional content defined by implementations
        Comments

        拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on MedicationStatement.effective[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 44. MedicationStatement.effective[x]:effectivePeriod.start
          Definition

          薬の服用を開始した日

          Short開始日
          Comments

          低要素が欠落している場合、意味は低い境界が知られていないことです。 / If the low element is missing, the meaning is that the low boundary is not known.

          Control0..1
          This element is affected by the following invariants: per-1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. MedicationStatement.effective[x]:effectivePeriod.end
          Definition

          薬の服用を終了する日

          Short終了日
          Comments

          この値は必ず境界日を含む。2012-02-03T10:00:00は2012-02-03を終了時刻(end)の値とする期間を示す。

          Control0..1
          This element is affected by the following invariants: per-1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Meaning if Missing期間の終了が欠落している場合、それは期間が進行中であることを意味します / If the end of the period is missing, it means that the period is ongoing
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. MedicationStatement.dateAsserted
          Definition

          情報源となったインスタンスでこのステートメントが言明された日

          Shortこのステートメントが言明された日
          Control0..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. MedicationStatement.informationSource
          Definition

          この服用状況についての情報を提供した人物あるいは組織についての参照

          Shortこの服用状況についての情報を提供した人物あるいは組織についての参照
          Control0..1
          TypeReference(Patient, Practitioner, PractitionerRole, RelatedPerson, Organization)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. MedicationStatement.derivedFrom
          Definition

          MedicationStatementリソースと関連するMedicationRequestやその他の支持情報を表すリソースと関連付けられるようにする。

          Shortその他の支持情報
          Comments

          おそらく参考文献は、薬物療法、薬剤、請求、観察、またはアンケート担当者に関するものです。薬物測定を導き出すための最も一般的なユースケースは、薬物療法または実験室の観察または請求からの薬物測定の作成に由来しています。利用可能な情報の量は、投薬手段を導き出すタイプリソースから異なることに注意する必要があります。 / Likely references would be to MedicationRequest, MedicationDispense, Claim, Observation or QuestionnaireAnswers. The most common use cases for deriving a MedicationStatement comes from creating a MedicationStatement from a MedicationRequest or from a lab observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the MedicationStatement from.

          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. MedicationStatement.reasonCode
          Definition

          この薬剤た投与された理由

          Shortこの投薬の理由。対象疾患
          Comments

          このコードは疾患分類であっても良い。JP Coreでは傷病名マスターの使用を前提とする。

          Control0..*
          BindingFor example codes, see Condition/Problem/DiagnosisCodes
          (example to http://hl7.org/fhir/ValueSet/condition-code)

          薬が服用されている理由を特定するコード化された概念。 / A coded concept identifying why the medication is being taken.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. MedicationStatement.reasonCode.id
          Definition

          リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Short要素間参照のための一意のID / Unique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          58. MedicationStatement.reasonCode.extension
          Definition

          要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          Short実装で定義された追加のコンテンツ / Additional content defined by implementations
          Comments

          拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on MedicationStatement.reasonCode.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 60. MedicationStatement.reasonCode.coding
            Definition

            用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

            Short投与理由,対象疾患についてのコード
            Comments

            コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control0..*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. MedicationStatement.reasonCode.text
            Definition

            データを入力したユーザー、および/またはユーザーの意図された意味を表すユーザーによって見られる/選択/発言された概念の人間の言語表現。 / A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            Shortコンセプトの単純なテキスト表現 / Plain text representation of the concept
            Comments

            多くの場合、テキストはコーディングの1つの表示名と同じです。 / Very often the text is the same as a displayName of one of the codings.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            用語からのコードは、それらを使用する人間のすべてのニュアンスを使用して、常に正しい意味をキャプチャするとは限りません。または、適切なコードがまったくない場合があります。これらの場合、テキストはソースの完全な意味をキャプチャするために使用されます。 / The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. MedicationStatement.reasonReference
            Definition

            薬が摂取されている理由をサポートする状態または観察。 / Condition or observation that supports why the medication is being/was taken.

            Short服薬理由を支持するObservation, Condition, DiagnosticReportについての参照。
            Comments

            これは、薬が服用されている/服用されている理由である状態への言及です。コードのみが存在する場合は、ReasonForUseCodeを使用してください。 / This is a reference to a condition that is the reason why the medication is being/was taken. If only a code exists, use reasonForUseCode.

            Control0..*
            TypeReference(Condition, Observation, DiagnosticReport)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. MedicationStatement.note
            Definition

            他の属性には記載できないこのstatementについての備考情報

            Short他のフィールドには記述できないこのstatementについての追加情報
            Control0..*
            TypeAnnotation
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. MedicationStatement.dosage
            Definition

            患者にこの薬剤がどのように服用すべきかを示す情報

            Shortこの薬剤がどのように服用されたのか,服用すべきだったのかを示す情報
            Comments

            投薬声明の投与量に含まれる日付は、特定の用量の日付を反映しています。たとえば、「2016年11月1日から2016年11月3日まで、毎日1錠を服用し、2016年11月4日から2016年11月7日まで、毎日2錠を服用してください。」この特異性は、患者が標識容器を持ち込む場合、または薬物療法の声明が薬物療法に由来する場合にのみ居住することが予想されます。 / The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

            Control0..*
            TypeDosage(JP Core MedicationDosage Injection DataType)
            Is Modifierfalse
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. MedicationStatement.dosage.id
            Definition

            リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Short要素間参照のための一意のID / Unique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            72. MedicationStatement.dosage.extension
            Definition

            要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            Short実装で定義された追加のコンテンツ / Additional content defined by implementations
            Comments

            拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on MedicationStatement.dosage.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 74. MedicationStatement.dosage.extension:dosageComment
              Slice NamedosageComment
              Definition

              用法コメントを格納するための拡張

              Short用法コメント
              Control0..*
              TypeExtension(JP Core Medication Dosage DosageComment Extension) (Extension Type: Choice of: string, CodeableConcept)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              76. MedicationStatement.dosage.extension:device
              Slice Namedevice
              Definition

              投与装置を格納する拡張

              Short投与装置
              Control0..*
              TypeExtension(JP Core Medication Dosage Device Extension) (Extension Type: Reference(Device))
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              78. MedicationStatement.dosage.extension:line
              Slice Nameline
              Definition

              指示ラインを格納する拡張

              Short指示ライン
              Control0..*
              TypeExtension(JP Core Medication Dosage Line Extension) (Extension Type: CodeableConcept)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              80. MedicationStatement.dosage.extension:lineComment
              Slice NamelineComment
              Definition

              ラインコメントを格納するための拡張

              Shortラインコメント
              Control0..*
              TypeExtension(JP Core Medication Dosage LineComment Extension) (Extension Type: Choice of: string, CodeableConcept)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              82. MedicationStatement.dosage.extension:rateComment
              Slice NamerateComment
              Definition

              投与速度コメントを格納するための拡張

              Short投与速度コメント
              Control0..*
              TypeExtension(JP Core Medication Dosage RateComment Extension) (Extension Type: Choice of: string, CodeableConcept)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              84. MedicationStatement.dosage.modifierExtension
              Definition

              要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

              モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              86. MedicationStatement.dosage.sequence
              Definition

              どの服用指示を適応するか判断するかについての順序を示したもの

              Short服用指示の順番
              Comments

              32 bitの数値。これ以上の値であれば10進数を使うこと。

              Control0..1
              Typeinteger
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              もし、複数の服用法(Dosage)でsequenceの数値が同じであれば、その指示が同時に扱われることを示している。sequenceの数値が異なれば、服用指示(Dosage)の順番を意図している。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. MedicationStatement.dosage.text
              Definition

              投与⽅法のテキスト表現。コードで指定できない場合、本要素で文字列として指定してもよい。

              Short投与⽅法のテキスト表現
              Comments

              textエレメントはcodingのdisplayNameエレメントと一致することがよくある。

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              ターミノロジ由来のコードは必ずしも人間が使う言葉の全てのニュアンスを含めた正確な意味を捉えているわけではなく、適切なコードが見つからない場合もある。そのような場合でもtextエレメントは元々の意味のすべてを捉えるために使うことができる。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. MedicationStatement.dosage.additionalInstruction
              Definition

              どのように薬剤を内服するかについての患者への補足指示(たとえば、「食事と一緒に」や「30分から1時間前に内服」)や薬剤についての注意書き(たとえば、「眠くなることがある」や「日光や紫外線が皮膚にあたららないようにすること」)

              Short患者に対する補足指示や注意。たとえば、「食事と一緒に」「眠くなることがある」
              Comments

              薬剤投与や調剤についての情報(たとえば、「腹膜内ポートに可能な限り迅速に注入」や「薬剤Xの直後に」)であり、dosage.textにも複製されるべきである。

              Control0..*
              BindingThe codes SHOULD be taken from JP Core Medication JAMI Additional Usage ValueSet
              (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationUsageJAMIAdditional_VS)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              補足指示はコード化されるように意図されているが、コードがない場合はエレメントはテキストだけで表現することができる。たとえば、「大量の水で服用する」という指示はコード化されていることもあれば、されていないことおある。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. MedicationStatement.dosage.patientInstruction
              Definition

              患者あるいは消費者に理解してもらうための指示。

              Short患者あるいは消費者向けの指示
              Comments

              FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. MedicationStatement.dosage.timing
              Definition

              投与タイミングを記録する。

              Short投与タイミング
              Comments

              複数回発生する可能性のあるイベントの発生について説明します。タイミングスケジュールは、イベントが発生することが予想または要求される時期を指定するために使用され、過去または進行中のイベントの概要を表すためにも使用できます。簡単にするために、タイミングコンポーネントの定義は「将来の」イベントとして表現されますが、そのようなコンポーネントは歴史的または進行中のイベントを説明するためにも使用できます。

              タイミングスケジュールは、イベントが発生したときのイベントおよび/または基準のリストであり、構造化された形式またはコードとして表現できます。イベントと繰り返し仕様の両方が提供される場合、イベントのリストは、繰り返し構造の情報の解釈として理解されるべきです。 / Describes the occurrence of an event that may occur multiple times. Timing schedules are used for specifying when events are expected or requested to occur, and may also be used to represent the summary of a past or ongoing event. For simplicity, the definitions of Timing components are expressed as 'future' events, but such components can also be used to describe historic or ongoing events.

              A Timing schedule can be a list of events and/or criteria for when the event happens, which can be expressed in a structured form and/or as a code. When both event and a repeating specification are provided, the list of events should be understood as an interpretation of the information in the repeat structure.

              Control0..1
              TypeTiming(JP Core Medication Timing DataType)
              Is Modifierfalse
              Requirements

              患者に薬を与えるためのタイミングスケジュール。このデータ型により、さまざまな式が可能になります。たとえば、「8時間ごと」。"一日に三回";「2011年12月23日から10日間の朝食の1/2の1/2:」;「2013年10月15日、2013年10月17日、2013年11月1日」。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. MedicationStatement.dosage.timing.id
              Definition

              リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Short要素間参照のための一意のID / Unique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              98. MedicationStatement.dosage.timing.extension
              Definition

              要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              Short実装で定義された追加のコンテンツ / Additional content defined by implementations
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on MedicationStatement.dosage.timing.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 100. MedicationStatement.dosage.timing.modifierExtension
                Definition

                要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

                モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
                Comments

                拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                102. MedicationStatement.dosage.timing.event
                Definition

                服用タイミングを具体的な日時で指定する場合に使用する

                Short服用もしくは注射を行なうタイミングを示す時刻
                Control0..*
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                たとえば、投薬投与の記録では、一般的な仕様を取得し、それを正確な仕様に変える必要があります。 / In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.

                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                104. MedicationStatement.dosage.timing.repeat
                Definition

                イベントがスケジュールされたルールについての記述。

                Shortイベントが発生する時刻
                Control0..1
                TypeElement
                Is Modifierfalse
                Summarytrue
                Requirements

                スケジュールされたタイミングの多くは規則的な繰り返しで決定されている。

                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                tim-1: 期間がある場合は、期間単位が必要です / if there's a duration, there needs to be duration units (duration.empty() or durationUnit.exists())
                tim-2: 期間がある場合、期間単位が必要です / if there's a period, there needs to be period units (period.empty() or periodUnit.exists())
                tim-4: 期間は非陰性価値です / duration SHALL be a non-negative value (duration.exists() implies duration >= 0)
                tim-5: 期間は非陰性の価値です / period SHALL be a non-negative value (period.exists() implies period >= 0)
                tim-6: 期間がある場合、期間がなければなりません / If there's a periodMax, there must be a period (periodMax.empty() or period.exists())
                tim-7: Hurtermaxがある場合、期間がなければなりません / If there's a durationMax, there must be a duration (durationMax.empty() or duration.exists())
                tim-8: countmaxがある場合、カウントが必要です / If there's a countMax, there must be a count (countMax.empty() or count.exists())
                tim-9: オフセットがある場合、c、cm、cd、cvではなく(c、cvではない)存在する必要があります。 / If there's an offset, there must be a when (and not C, CM, CD, CV) (offset.empty() or (when.exists() and ((when in ('C' | 'CM' | 'CD' | 'CV')).not())))
                tim-10: 時間がある場合、いつ、またはその逆もありません / If there's a timeOfDay, there cannot be a when, or vice versa (timeOfDay.empty() or when.empty())
                106. MedicationStatement.dosage.timing.repeat.id
                Definition

                リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                Short要素間参照のための一意のID / Unique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                108. MedicationStatement.dosage.timing.repeat.extension
                Definition

                要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                Comments

                拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on MedicationStatement.dosage.timing.repeat.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 110. MedicationStatement.dosage.timing.repeat.bounds[x]
                  Definition

                  服用・注射開始日から服用・注射終了日までの全日数。実投与日数ではないことに注意する。

                  Short服用・注射開始日から服用・注射終了日までの全日数
                  Control0..1
                  TypeChoice of: Duration, Range, Period
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  112. MedicationStatement.dosage.timing.repeat.count
                  Definition

                  Timing仕様の全てにおいて、特定の期間に繰り返されるように指定された総回数。もし、countMaxが設定されていれば、このエレメントは許容される最低限度の回数を示す。

                  Short繰り返し服用もしくは注射回数
                  Comments

                  回数に上限、下限の範囲がある場合は、このcountで示される回数が起きるまでは、エレメントは範囲の中にあると解釈されるべきである。

                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  繰り返しは、終了時間または合計発生によって制限される場合があります。 / Repetitions may be limited by end time or total occurrences.

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  114. MedicationStatement.dosage.timing.repeat.countMax
                  Definition

                  このエレメントが設定されている場合は、回数に範囲があることを示している。したがって、[count]から[countmax]までの回数で繰り返される。

                  Short繰り返しの最大回数
                  Comments

                  32bit整数。もし、値がこれを超える場合はdecimalで記録される。

                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  116. MedicationStatement.dosage.timing.repeat.duration
                  Definition

                  投与されるタイミングが発生している時間。もし、durationMaxが設定されていれば、このエレメントは許容される継続時間の下限を示す。

                  Short継続時間
                  Comments

                  継続時間はイベントの定義の一部(たとえば、静脈注射(IV)では特定の量と速度が明示される)として示されることがある。その他、Timing仕様の一部(たとえば、運動)として示されることもある。

                  Control0..1
                  Typedecimal
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  アクティビティによっては即時的なものではなく、その期間において維持される必要がある。

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  118. MedicationStatement.dosage.timing.repeat.durationMax
                  Definition

                  もし、このエレメントに値が設定されていれば、durationには範囲があることを示している。したがって、[duration]から[durationMax]までの継続時間の範囲で投与される。

                  Short継続時間(最大値)
                  Comments

                  継続時間はイベントの定義の一部(たとえば、静脈注射(IV)では特定の量と速度が明示される)として示されることがある。その他、Timing仕様の一部(たとえば、運動)として示されることもある。

                  Control0..1
                  Typedecimal
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  アクティビティによっては即時的なものではなく、その期間において維持される必要がある。

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  120. MedicationStatement.dosage.timing.repeat.durationUnit
                  Definition

                  UCUM単位で表される継続時間についての単位。

                  Shorts |min |h |d |wk |mo |A-時間単位(ucum) / s | min | h | d | wk | mo | a - unit of time (UCUM)
                  Comments

                  FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

                  Control0..1
                  BindingThe codes SHALL be taken from UnitsOfTime
                  (required to http://hl7.org/fhir/ValueSet/units-of-time|4.0.1)

                  時間単位(UCUMからの単位)。 / A unit of time (units from UCUM).

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  122. MedicationStatement.dosage.timing.repeat.frequency
                  Definition

                  特定の期間に繰り返して発生した行為の回数。もし、frequencyMaxが設定されていれば、このエレメントはfrequencyとして認められた下限を示す。

                  Short期間内にイベントが発生する回数、頻度
                  Comments

                  32ビットの数値。もし、値がそれを上回るようであればdecimalを使用する。

                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Meaning if Missing頻度が記載されていない場合、イベントは期間ごとに1回発生するという仮定ですが、システムは常にこれについて具体的でなければなりません / If no frequency is stated, the assumption is that the event occurs once per period, but systems SHOULD always be specific about this
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  124. MedicationStatement.dosage.timing.repeat.frequencyMax
                  Definition

                  このエレメントに値が設定されていれば、frequencyには範囲が指定されている。つまり、期間あるいは期間の範囲内に[frequency]から[frequencyMax]回繰り返されることを示している。

                  Short期間内にイベントが発生する最大回数、最大頻度
                  Comments

                  32ビットの数値。もし、値がそれを上回るようであればdecimalを使用する。

                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  126. MedicationStatement.dosage.timing.repeat.period
                  Definition

                  繰り返し投与が行われる期間を示す。たとえば、「1日3回」であれば、3は繰り返しの頻度(frequency)であり、「1日」が期間(period)である。もし、periodMaxに値が設定されていれば、このエレメントは期間として認められた範囲の下限を示す。

                  Shortイベントが発生する頻度に対応する期間
                  Comments

                  IEEEの浮動小数点型を使わずに、小数点も含むdecimal型のようなものを利用すること(たとえばJavaのBigInteger)。

                  Control0..1
                  Typedecimal
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  128. MedicationStatement.dosage.timing.repeat.periodMax
                  Definition

                  もし、この値が設定されていれば、期間は[period]から[periodMax]までであることを示し、「3-5日に1回投与」のような表現が認められる。

                  Short期間の上限(3-4時間)
                  Comments

                  IEEEの浮動小数点型を使わずに、小数点の制度も示すdecimal型のようなものを利用すること(たとえばJavaのBigInteger)。

                  Control0..1
                  Typedecimal
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  130. MedicationStatement.dosage.timing.repeat.periodUnit
                  Definition

                  期間を表すUCUM単位。

                  Shorts |min |h |d |wk |mo |A-時間単位(ucum) / s | min | h | d | wk | mo | a - unit of time (UCUM)
                  Comments

                  FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

                  Control0..1
                  BindingThe codes SHALL be taken from UnitsOfTime
                  (required to http://hl7.org/fhir/ValueSet/units-of-time|4.0.1)

                  時間単位(UCUMからの単位)。 / A unit of time (units from UCUM).

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  132. MedicationStatement.dosage.timing.repeat.dayOfWeek
                  Definition

                  期間として1週間以上が指定されていれば、指定された曜日のみで投与が行われる。

                  Short月|火|水|木|金|土|太陽 / mon | tue | wed | thu | fri | sat | sun
                  Comments

                  曜日が指定されていなければ、他に指定された日には毎日投与されると想定される。frequencyとperiodエレメントはdayOfWeekと同じように使うことはできない。

                  Control0..*
                  BindingThe codes SHALL be taken from DaysOfWeek
                  (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  134. MedicationStatement.dosage.timing.repeat.timeOfDay
                  Definition

                  一日の間で指定された投与される時刻。

                  Short一日の間で投与される時刻
                  Comments

                  もし、このtimeOfDayに値が指定されていれば、毎日(daysOfWeekでフィルタされた曜日の)指定された時刻に投与されると推定される。whenやfrequency, periodエレメントはtimeOfDayとは同様に使うことはできない。

                  Control0..*
                  Typetime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  136. MedicationStatement.dosage.timing.repeat.when
                  Definition

                  一日の間のおおよその時間帯で投与すべきタイミングを示す。日常のイベントに関連付けられていることもある。

                  Short投薬期間についてのコード
                  Comments

                  一つ以上のイベントが記載されている場合、そのイベントは特定のイベントの組み合わせと結びついている。

                  Control0..*
                  BindingThe codes SHALL be taken from EventTiming
                  (required to http://hl7.org/fhir/ValueSet/event-timing|4.0.1)

                  スケジュールに関連する現実世界のイベント。 / Real world event relating to the schedule.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  タイミングはしばしば起床や食事、睡眠などのできごとによってしばしば決定されている。

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  138. MedicationStatement.dosage.timing.repeat.offset
                  Definition

                  イベントからの時間(分)。もし、分で示される時間がイベントのコードが前か後かを示していない場合、offsetはイベントの後であることが想定される。

                  Shortイベントからの時間(分、前後)
                  Comments

                  32ビットの数値。もし、値がそれを上回るようであればdecimalを使用する。

                  Control0..1
                  TypeunsignedInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  140. MedicationStatement.dosage.timing.code
                  Definition

                  スケジュール上のタイミングを表すコード(あるいはcode.text内のテキスト)。BID(1日2回)のようなコードはどこにでもあるが、多くの医療機関は付加的なコードを定義している。もし、コードが示されていれば、構造化されたタイミングで完全に示されたデータであると解釈され、コードまたはTimingを解釈するためのデータであると解釈される。しかし、例外的に.repeat.bounds(コードは含まれない)はコードを上書きして適用される。

                  Short入札|TID |QID |AM |PM |QD |qod |+ / BID | TID | QID | AM | PM | QD | QOD | +
                  Comments

                  BIDなどは「施設特有の時間」として定義される。たとえば、施設がBIDを「つねに朝7時と夕方6時」であると指定することがある。この指定が不適切であれば、BIDというコードは使うべきではない。その代わり、HL7が定義したBIDのコードではなく、その施設特有のコードで明示的に示すべきであり、構造化された表現を使うべきである(この場合、2回のイベントの時刻を指定する必要がある)。
                  【JP Core仕様】頓用指示時にはJAMI処方・注射オーダ標準用法規格の表6 イベント区分、イベント詳細区分(“http://jpfhir.jp/fhir/core/CodeSystem/JP_MedicationAsNeededConditionJAMI_CS”)を推奨するが、MERIT-9 処方オーダ 表5 頓用指示(“http://jpfhir.jp/fhir/core/CodeSystem/JP_MedicationAsNeededConditionMERIT9_CS”) を使用してもよい。

                  Control0..1
                  BindingThe codes SHOULD be taken from JP Core MedicationReuqest Injection Usage ValueSet
                  (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationUsageInjection_VS)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  142. MedicationStatement.dosage.asNeeded[x]
                  Definition

                  【JP Core仕様】頓用型の用法を指定する場合に”true”を指定し、そのコードを指定する場合は用法コードとして指定する。
                  Medication(薬剤)が必要なときに指定された量とスケジュールのみで投薬するか(Booleanで選択される)、投薬する前提条件はTiming.Code(CodeableConcept)を示している。

                  Short「頓用」指示
                  Comments

                  boolean = trueを設定することにより、理由なしに「必要に応じて」表現できます。この場合、codeableconceptは存在しません。または、Codeableconceptを含めることにより、「必要に応じて」理由で「必要に応じて」表現することができます。この場合、ブール値は真であると想定されています。ブール値をfalseに設定すると、用量はスケジュールに従って与えられ、「PRN」または「必要に応じて」ではありません。 / Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed".

                  Control0..1
                  Typeboolean
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  144. MedicationStatement.dosage.site
                  Definition

                  投与される身体部位。外用薬で部位を指定する場合に使用する。

                  Short投与される身体部位
                  Comments

                  もし、BodySite resourceの属性が必要な場合(たとえば、部位の指定や別々に投与経路を設定する場合)は、bodySiteの標準拡張を使うこと。要約コードや非常に正確な位置の定義へのreferenceを使用することもできる。
                  【JP Core仕様】JAMI外用部位3桁コードを使用することが望ましいが、ローカルコードも使用可能。

                  Control0..1
                  BindingThe codes SHOULD be taken from JP Core Medication JAMI External Body Site ValueSet
                  (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationBodySiteJAMIExternal_VS)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  薬が最初に体に入る解剖学的部位のコード化された仕様。 / A coded specification of the anatomic site where the medication first enters the body.

                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  146. MedicationStatement.dosage.site.id
                  Definition

                  リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  Short要素間参照のための一意のID / Unique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  148. MedicationStatement.dosage.site.extension
                  Definition

                  要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                  Comments

                  拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on MedicationStatement.dosage.site.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 150. MedicationStatement.dosage.site.extension:siteComment
                    Slice NamesiteComment
                    Definition

                    投与部位コメントを格納するための拡張

                    Short投与部位コメント
                    Control0..*
                    TypeExtension(JP Core Medication Dosage SiteComment Extension) (Extension Type: Choice of: string, CodeableConcept)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    152. MedicationStatement.dosage.site.extension:bodySite
                    Slice NamebodySite
                    Definition

                    身体部位の位置に関する詳細情報。site概念がユースケースに必要な詳細を提供しない場合に使用される。

                    Short身体部位の位置に関する詳細
                    Control0..*
                    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    154. MedicationStatement.dosage.site.coding
                    Definition

                    用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                    Short用語システムによって定義されたコード / Code defined by a terminology system
                    Comments

                    コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                    Control0..*
                    TypeCoding
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    156. MedicationStatement.dosage.site.text
                    Definition

                    データを入力したユーザー、および/またはユーザーの意図された意味を表すユーザーによって見られる/選択/発言された概念の人間の言語表現。 / A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                    Shortコンセプトの単純なテキスト表現 / Plain text representation of the concept
                    Comments

                    多くの場合、テキストはコーディングの1つの表示名と同じです。 / Very often the text is the same as a displayName of one of the codings.

                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    用語からのコードは、それらを使用する人間のすべてのニュアンスを使用して、常に正しい意味をキャプチャするとは限りません。または、適切なコードがまったくない場合があります。これらの場合、テキストはソースの完全な意味をキャプチャするために使用されます。 / The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    158. MedicationStatement.dosage.route
                    Definition

                    投与経路

                    Short投与経路
                    Comments

                    投与経路の一般的パターンに全てのターミノロジが適応しているわけではない。情報モデルはCodeableConceptではなく、直接Codingをを使用してテキストやコーディング、翻訳、そしてエレメントと事前条件、事後条件の関係について管理するためにその構造を提示する必要がある。
                    【JP Core仕様】HL7表0162をベースにした投与経路コードを使用することが望ましいが、ローカルコードも使用可能。

                    Control0..1
                    BindingThe codes SHOULD be taken from JP Core Medication HL70162-based Route ValueSet
                    (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationRouteHL70162_VS)
                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    患者の体への、または患者の体内への治療剤の投与のルートまたは生理学的経路を指定するコード。 / A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    160. MedicationStatement.dosage.route.id
                    Definition

                    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    Short要素間参照のための一意のID / Unique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    162. MedicationStatement.dosage.route.extension
                    Definition

                    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                    Comments

                    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on MedicationStatement.dosage.route.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 164. MedicationStatement.dosage.route.extension:routeComment
                      Slice NamerouteComment
                      Definition

                      投与経路コメントを格納するための拡張

                      Short投与経路コメント
                      Control0..*
                      TypeExtension(JP Core Medication Dosage RouteComment Extension) (Extension Type: Choice of: string, CodeableConcept)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      166. MedicationStatement.dosage.route.coding
                      Definition

                      用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                      Short用語システムによって定義されたコード / Code defined by a terminology system
                      Comments

                      コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control0..*
                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      168. MedicationStatement.dosage.route.text
                      Definition

                      データを入力したユーザー、および/またはユーザーの意図された意味を表すユーザーによって見られる/選択/発言された概念の人間の言語表現。 / A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                      Shortコンセプトの単純なテキスト表現 / Plain text representation of the concept
                      Comments

                      多くの場合、テキストはコーディングの1つの表示名と同じです。 / Very often the text is the same as a displayName of one of the codings.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      用語からのコードは、それらを使用する人間のすべてのニュアンスを使用して、常に正しい意味をキャプチャするとは限りません。または、適切なコードがまったくない場合があります。これらの場合、テキストはソースの完全な意味をキャプチャするために使用されます。 / The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      170. MedicationStatement.dosage.method
                      Definition

                      投与方法

                      Short投与方法
                      Comments

                      ターミノロジは投与する経路あるいは剤型をあらかじめ指定するために用いられる。

                      Control0..1
                      BindingFor example codes, see SNOMEDCTAdministrationMethodCodes
                      (example to http://hl7.org/fhir/ValueSet/administration-method-codes)

                      薬が投与される手法を説明するコード化された概念。 / A coded concept describing the technique by which the medicine is administered.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      コード化された値は体内に薬剤が投与される方法を示している。注射ではよく使われる。たとえば、緩徐に注入、深部に静注など。

                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      172. MedicationStatement.dosage.method.id
                      Definition

                      リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      Short要素間参照のための一意のID / Unique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      174. MedicationStatement.dosage.method.extension
                      Definition

                      要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                      Comments

                      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on MedicationStatement.dosage.method.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 176. MedicationStatement.dosage.method.extension:methodComment
                        Slice NamemethodComment
                        Definition

                        手技コメントを格納するための拡張

                        Short手技コメント
                        Control0..*
                        TypeExtension(JP Core Medication Dosage MethodComment Extension) (Extension Type: Choice of: string, CodeableConcept)
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        178. MedicationStatement.dosage.method.coding
                        Definition

                        用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

                        Short用語システムによって定義されたコード / Code defined by a terminology system
                        Comments

                        コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                        Control0..*
                        TypeCoding
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

                        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on MedicationStatement.dosage.method.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ system
                        • 180. MedicationStatement.dosage.method.coding:unitDigit1
                          Slice NameunitDigit1
                          Definition

                          投与⽅法に対応するJAMI 用法コード表基本用法1桁コードを識別するURI。

                          Short投与⽅法に対応するJAMI 用法コード表基本用法1桁コード
                          Comments

                          コードは臨時で列記したものや、コードのリストからSNOMED CTのように公式に定義されたものまである(HL7 v3 core principle を参照)。FHIR自体ではコーディング規約を定めてはいないし、意味を暗示するために利用されない(SHALL NOT)。一般的に UserSelected = trueの場合には一つのコードシステムが使われる。

                          Control0..1
                          BindingThe codes SHOULD be taken from JP Core Medication JAMI Basic Usage Type ValueSet
                          (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationMethodJAMIBasicUsage_VS)
                          TypeCoding
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          他のコードシステムへの変換や代替のコードシステムを使ってエンコードしてもよい。

                          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          182. MedicationStatement.dosage.method.coding:unitDigit1.id
                          Definition

                          リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          Short要素間参照のための一意のID / Unique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          184. MedicationStatement.dosage.method.coding:unitDigit1.extension
                          Definition

                          要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                          Comments

                          拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on MedicationStatement.dosage.method.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 186. MedicationStatement.dosage.method.coding:unitDigit1.system
                            Definition

                            コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

                            Short用語システムのアイデンティティ / Identity of the terminology system
                            Comments

                            uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

                            Fixed Valueurn:oid:1.2.392.200250.2.2.20.30
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            188. MedicationStatement.dosage.method.coding:unitDigit1.version
                            Definition

                            このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                            Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
                            Comments

                            用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                            NoteThis is a business version Id, not a resource version Id (see discussion)
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            190. MedicationStatement.dosage.method.coding:unitDigit1.code
                            Definition

                            システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                            Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
                            Control0..1
                            Typecode
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            192. MedicationStatement.dosage.method.coding:unitDigit1.display
                            Definition

                            システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

                            Shortシステムによって定義された表現 / Representation defined by the system
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            194. MedicationStatement.dosage.method.coding:unitDigit1.userSelected
                            Definition

                            このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                            Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
                            Comments

                            一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                            Control0..1
                            Typeboolean
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            196. MedicationStatement.dosage.method.coding:unitDigit2
                            Slice NameunitDigit2
                            Definition

                            投与⽅法に対応するJAMI 用法コード表基本用法2桁コードを識別するURI。2桁コードurn:oid:1.2.392.200250.2.2.20.40

                            Short投与⽅法に対応するJAMI 用法コード表基本用法2桁コード
                            Comments

                            コードは臨時で列記したものや、コードのリストからSNOMED CTのように公式に定義されたものまである(HL7 v3 core principle を参照)。FHIR自体ではコーディング規約を定めてはいないし、意味を暗示するために利用されない(SHALL NOT)。一般的に UserSelected = trueの場合には一つのコードシステムが使われる。

                            Control0..1
                            BindingThe codes SHOULD be taken from JP Core Medication JAMI Detail Usage ValueSet
                            (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationMethodJAMIDetailUsage_VS)
                            TypeCoding
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            他のコードシステムへの変換や代替のコードシステムを使ってエンコードしてもよい。

                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            198. MedicationStatement.dosage.method.coding:unitDigit2.id
                            Definition

                            リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            Short要素間参照のための一意のID / Unique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            200. MedicationStatement.dosage.method.coding:unitDigit2.extension
                            Definition

                            要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                            Comments

                            拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on MedicationStatement.dosage.method.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 202. MedicationStatement.dosage.method.coding:unitDigit2.system
                              Definition

                              コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

                              Short用語システムのアイデンティティ / Identity of the terminology system
                              Comments

                              uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

                              Fixed Valueurn:oid:1.2.392.200250.2.2.20.40
                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              204. MedicationStatement.dosage.method.coding:unitDigit2.version
                              Definition

                              このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                              Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
                              Comments

                              用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                              NoteThis is a business version Id, not a resource version Id (see discussion)
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              206. MedicationStatement.dosage.method.coding:unitDigit2.code
                              Definition

                              システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                              Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
                              Control0..1
                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              208. MedicationStatement.dosage.method.coding:unitDigit2.display
                              Definition

                              システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

                              Shortシステムによって定義された表現 / Representation defined by the system
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              210. MedicationStatement.dosage.method.coding:unitDigit2.userSelected
                              Definition

                              このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                              Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
                              Comments

                              一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              212. MedicationStatement.dosage.method.text
                              Definition

                              投与⽅法のテキスト表現。コードで指定できない場合、本要素で文字列として指定してもよい。

                              Short投与⽅法のテキスト表現
                              Comments

                              textエレメントはcodingのdisplayNameエレメントと一致することがよくある。

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              ターミノロジ由来のコードは必ずしも人間が使う言葉の全てのニュアンスを含めた正確な意味を捉えているわけではなく、適切なコードが見つからない場合もある。そのような場合でもtextエレメントは元々の意味のすべてを捉えるために使うことができる。

                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              214. MedicationStatement.dosage.doseAndRate
                              Definition

                              薬剤が投与される量

                              Short薬剤の投与量
                              Control0..*
                              TypeElement
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              216. MedicationStatement.dosage.doseAndRate.id
                              Definition

                              リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              Short要素間参照のための一意のID / Unique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              218. MedicationStatement.dosage.doseAndRate.extension
                              Definition

                              要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              Short実装で定義された追加のコンテンツ / Additional content defined by implementations
                              Comments

                              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on MedicationStatement.dosage.doseAndRate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 220. MedicationStatement.dosage.doseAndRate.extension:rateComment
                                Slice NamerateComment
                                Definition

                                投与速度コメントを格納するための拡張

                                Short投与速度コメント
                                Control0..*
                                TypeExtension(JP Core Medication Dosage RateComment Extension) (Extension Type: Choice of: string, CodeableConcept)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                222. MedicationStatement.dosage.doseAndRate.type
                                Definition

                                力価区分

                                Short力価区分
                                Comments

                                投与速度・量の一般的パターンに全てのターミノロジが適応しているわけではない。情報モデルはCodeableConceptではなく、直接Codingをを使用してテキストやコーディング、翻訳、そしてエレメントと事前条件、事後条件の関係について管理するためにその構造を提示する必要がある。

                                Control0..1
                                BindingThe codes SHOULD be taken from JP Core Medication IngredientStrength StrengthType ValueSet
                                (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationIngredientStrengthStrengthType_VS)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                このtypeに値が指定されていなければ、"ordered"であることが想定される。

                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                224. MedicationStatement.dosage.doseAndRate.dose[x]
                                Definition

                                1回投与量(体積)

                                Short1回投与量(体積)
                                Comments

                                この量は指定された薬剤の量を指定するものであって、各有効成分の量を指定するものではない。各成分の量はMedication resourceで伝えることができる。たとえば、有効成分が375mgである錠剤を1錠投与することを伝えたい場合、Medication resourceを利用して、XYZ成分が375mg含有しているという錠剤であることを文書化することができる。あるいは1回投与量が375mgであることを伝えるのであれば、Medication resourceをつかって単にそれが錠剤であることを示せばよい。もし、ドーパミンの静注を例に挙げて、400mgのドーパミンを500mlの注射溶液に混ぜて使うことを伝えたいのであれば、それをすべてMedication resourceで伝えることができる。もし、投与について即時に伝達することを意図していない(たとえば投与速度が示されていたり、投与時期に範囲があるような場合)のであれば、たとえば1回500mlを4時間以上かけて投与する予定を伝える場合にもMedication resourceで伝えることができる。
                                【JP Core仕様】1回の投与量(体積)を指定する。単位はUCUMを使用する。

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeQuantity(JP Core Medication Quantity DataType)
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Requirements

                                1つの投与イベントで与えられた治療またはその他の物質の量。 / The amount of therapeutic or other substance given at one administration event.

                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
                                sqty-1: コンパレータは、単純なQuantityで使用されません / The comparator is not used on a SimpleQuantity (comparator.empty())
                                226. MedicationStatement.dosage.doseAndRate.rate[x]
                                Definition

                                薬剤が投与される量の速度

                                Short薬剤の投与量速度
                                Comments

                                レートとデスケーティティの両方を供給して、薬の投与と供給の方法についての詳細を提供することができます。レートが時間の経過とともに変化することを目的としている場合、ローカルのルール/規制に応じて、各変更は、更新されたレートのある薬物療法の新しいバージョンとしてキャプチャするか、新しいレートで新しい薬物採取でキャプチャされる必要があります。

                                レート(100 ml/hour)を使用して、時間の経過とともにレートを指定することができます。RateQuantityアプローチでは、時間が分母として指定されている特定の比率ではなく、ML/時間が含まれているUCUMグラマーを解析する機能をシステムに持つ必要があります。2時間にわたって500mlなどのレートが指定されている場合、250 mg/時のレートの量を使用して指定するよりも、定量的に正しい場合があります。 / It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

                                It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.

                                Control0..1
                                TypeChoice of: Ratio, Range, Quantity(SimpleQuantity)
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                患者に薬が導入された、または導入される速度を識別します。通常、注入のレート。1時間あたり100 mlまたは100 ml/hr。また、時間単位あたりのレートとして表現することもできます。2時間あたり500 ml。その他の例:200 mcg/minまたは200 mcg/1分。1リットル/8時間。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

                                Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                SlicingThis element introduces a set of slices on MedicationStatement.dosage.doseAndRate.rate[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                • type @ $this
                                • 228. MedicationStatement.dosage.doseAndRate.rate[x]:rateRatio
                                  Slice NamerateRatio
                                  Definition

                                  単位時間内での薬剤の容量

                                  Short単位時間内での薬剤の容量
                                  Comments

                                  比率データタイプは、関係を数量と共通単位を使用して適切に表現できない場合にのみ、2つの数値の関係を表現するために使用する必要があります。分母値が「1」に固定されていることが知られている場合、比率ではなく数量を使用する必要があります。 / The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeRatio(JP Core Medication Rate Ratio DataType)
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Requirements

                                  患者に薬が導入された、または導入される速度を識別します。通常、注入のレート。1時間あたり100 mlまたは100 ml/hr。また、時間単位あたりのレートとして表現することもできます。2時間あたり500 ml。その他の例:200 mcg/minまたは200 mcg/1分。1リットル/8時間。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  rat-1: 分子と分母の両方が存在するか、両方が存在します。両方が欠席している場合、いくつかの拡張が存在するものとします / Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
                                  230. MedicationStatement.dosage.doseAndRate.rate[x]:rateRange
                                  Slice NamerateRange
                                  Definition

                                  範囲指定された時間の上限下限

                                  Short範囲指定された時間の上限下限
                                  Comments

                                  時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeRange(JP Core Medication Range DataType)
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Requirements

                                  患者に薬が導入された、または導入される速度を識別します。通常、注入のレート。1時間あたり100 mlまたは100 ml/hr。また、時間単位あたりのレートとして表現することもできます。2時間あたり500 ml。その他の例:200 mcg/minまたは200 mcg/1分。1リットル/8時間。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  rng-2: 存在する場合、低い値は高よりも低い値を持つものとします / If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high))
                                  232. MedicationStatement.dosage.doseAndRate.rate[x]:rateQuantity
                                  Slice NamerateQuantity
                                  Definition

                                  投与速度(流量)を指定する単位は流量を表す単位(e.g. 量/時間)を指定する

                                  Short投与速度(流量)を指定する単位は流量を表す単位(e.g. 量/時間)を指定する
                                  Comments

                                  使用のコンテキストは、これがどのような量であるか、したがってどのようなユニットを使用できるかを頻繁に定義する場合があります。使用のコンテキストは、コンパレータの値を制限する場合もあります。 / The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeQuantity(SimpleQuantity)
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Requirements

                                  患者に薬が導入された、または導入される速度を識別します。通常、注入のレート。1時間あたり100 mlまたは100 ml/hr。また、時間単位あたりのレートとして表現することもできます。2時間あたり500 ml。その他の例:200 mcg/minまたは200 mcg/1分。1リットル/8時間。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
                                  sqty-1: コンパレータは、単純なQuantityで使用されません / The comparator is not used on a SimpleQuantity (comparator.empty())
                                  234. MedicationStatement.dosage.maxDosePerPeriod
                                  Definition

                                  単位時間当たりの投薬量の上限

                                  Short単位時間当たりの投薬量の上限
                                  Comments

                                  比率データタイプは、関係を数量と共通単位を使用して適切に表現できない場合にのみ、2つの数値の関係を表現するために使用する必要があります。分母値が「1」に固定されていることが知られている場合、比率ではなく数量を使用する必要があります。 / The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeRatio(JP Core Medication Rate Ratio DataType)
                                  Is Modifierfalse
                                  Requirements

                                  期間にわたって被験者に投与される可能性のある治療物質の最大総量。たとえば、24時間で1000mg。 / The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  rat-1: 分子と分母の両方が存在するか、両方が存在します。両方が欠席している場合、いくつかの拡張が存在するものとします / Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
                                  236. MedicationStatement.dosage.maxDosePerAdministration
                                  Definition

                                  1回あたりの投薬量の上限

                                  Short1回あたりの投薬量の上限
                                  Comments

                                  薬剤に関する簡易的な数量と単位を定めている。ValueおよびCodeを必須とし、comparatorは記述不可。単位についてはMERIT9医薬品単位略号の利用を推進している。(SHOULD)

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeQuantity(JP Core Medication Quantity DataType)
                                  Is Modifierfalse
                                  Requirements

                                  投与ごとの被験者に投与される可能性のある治療物質の最大総量。 / The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
                                  sqty-1: コンパレータは、単純なQuantityで使用されません / The comparator is not used on a SimpleQuantity (comparator.empty())
                                  238. MedicationStatement.dosage.maxDosePerLifetime
                                  Definition

                                  生涯の投薬量の上限

                                  Short生涯の投薬量の上限
                                  Comments

                                  薬剤に関する簡易的な数量と単位を定めている。ValueおよびCodeを必須とし、comparatorは記述不可。単位についてはMERIT9医薬品単位略号の利用を推進している。(SHOULD)

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  TypeQuantity(JP Core Medication Quantity DataType)
                                  Is Modifierfalse
                                  Requirements

                                  被験者の寿命ごとに投与される可能性のある治療物質の最大総量。 / The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

                                  Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
                                  sqty-1: コンパレータは、単純なQuantityで使用されません / The comparator is not used on a SimpleQuantity (comparator.empty())
                                  本実装ガイドへのご質問・ご指摘については、GitHub IssueおよびGitHub PullRequestにて受け付けております。