HL7 FHIR JP Core ImplementationGuide
1.1.2-dev - ci-build Japan flag

HL7 FHIR JP Core ImplementationGuide - Local Development build (v1.1.2-dev) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Data Type Profile: JP_MedicationRatio_DosePerPeriod - Detailed Descriptions

Active as of 2023-10-31

Definitions for the jp-medicationratio-doseperperiod data type profile.

Guidance on how to interpret the contents of this table can be found here

0. Ratio
Definition

単位時間内での薬剤の容量

Short単位時間内での薬剤の容量
2. Ratio.numerator
Definition

投与量

Short投与量
TypeQuantity(JP Core Medication Quantity DataType)
4. Ratio.numerator.value
Definition

投与量

Short投与量
6. Ratio.numerator.unit
Definition

投与量の単位。

Short投与量の単位
8. Ratio.denominator
Definition

単位時間

Short単位時間
10. Ratio.denominator.value
Definition

単位時間

Short単位時間
12. Ratio.denominator.unit
Definition

単位時間の単位。UCUMを使用する。

Short単位時間の単位
14. Ratio.denominator.system
Definition

UCUMを識別するURL。固定値。

ShortUCUMを識別するURL
16. Ratio.denominator.code
BindingThe codes SHOULD be taken from UnitsOfTime
(preferred to http://hl7.org/fhir/ValueSet/units-of-time)

Guidance on how to interpret the contents of this table can be found here

0. Ratio
Definition

単位時間内での薬剤の容量


分子と分母として表される2つの数量値の関係。 / A relationship of two Quantity values - expressed as a numerator and a denominator.

Short単位時間内での薬剤の容量分子と分母の2つの数量値の比率 / A ratio of two Quantity values - a numerator and a denominator
Comments

比率データタイプは、関係を数量と共通単位を使用して適切に表現できない場合にのみ、2つの数値の関係を表現するために使用する必要があります。分母値が「1」に固定されていることが知られている場合、比率ではなく数量を使用する必要があります。 / The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: 分子と分母の両方が存在するか、両方が存在します。両方が欠席している場合、いくつかの拡張が存在するものとします / Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
rat-1: 分子と分母の両方が存在するか、両方が存在します。両方が欠席している場合、いくつかの拡張が存在するものとします / Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
2. Ratio.numerator
Definition

投与量


分子の値。 / The value of the numerator.

Short投与量分子値 / Numerator value
Comments

薬剤に関する数量と単位を定めている。ValueおよびCodeを必須としている。単位についてはMERIT9医薬品単位略号の利用を推進している。(SHOULD)

Control0..1
This element is affected by the following invariants: ele-1
TypeQuantity(JP Core Medication Quantity DataType)
Is Modifierfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
4. Ratio.numerator.value
Definition

投与量


測定量の値。値には、値の表示に暗黙の精度が含まれます。 / The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Short投与量数値(暗黙の精度を持つ) / Numerical value (with implicit precision)
Comments

暗示された精度については常に尊重すべきである。貨幣計算では制度に関する独自のルールがある(会計についての標準的な教科書を参照すること)。


値の暗黙の精度は常に尊重されるべきです。金銭的価値には、精度を処理するための独自のルールがあります(標準的な会計の教科書を参照)。 / The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control10..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Ratio.numerator.comparator
Definition

実際の値が計測して示された値よりも大きいのか小さいのかなど、値がどのように解釈され、表現されるのかを示している。たとえば、もし、comparatorエレメントが"<"であれば、実際の値は示された値よりも小さい(<)。


値をどのように理解し、表現する必要があるか - 測定の問題により実際の値が記載されている値よりも大きいか小さいかどうか。例えばコンパレータが「<」の場合、実際の値は<stated値です。 / How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short< | <= | >= | > - 値の解釈法<|<= |> = |> - 価値を理解する方法 / < | <= | >= | > - how to understand the value
Comments

FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

量を理解し、表現する方法。 / How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

計測法に制限があって値が<5ug/L や >400mg/L として示されるような場合でも値を扱えるようなフレームワークが必要である。


測定方法の制限があるため、値が<5ug/Lまたは> 400mg/Lの測定値を処理するためのフレームワークが必要です。 / Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Ratio.numerator.unit
Definition

投与量の単位。


ユニットの人間の読み取り可能な形式。 / A human-readable form of the unit.

Short投与量の単位ユニット表現 / Unit representation
Comments

FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

コンテキストによってさまざまな単位の表現がある。固定された特定の表現が求められることがある。たとえば、mcgはmicrogramを表す。


測定単位には多くの表現があり、多くのコンテキストでは、特定の表現が固定され、必要です。すなわちマイクログラム用MCG。 / There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Ratio.numerator.code
Definition

単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨(SHOULD)


一部のユニット表現システムのユニットのコンピューター処理可能な形式。 / A computer processable form of the unit in some unit representation system.

Short単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨ユニットのコード化された形式 / Coded form of the unit
Comments

単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨(SHOULD)されるが、ローカルコード等を利用することも可能とする


優先システムはUCUMですが、独自の単位にはSNOMED-CT、または通貨にISO 4217を使用することもできます。使用のコンテキストには、特定のシステムからのコードがさらに必要になる場合があります。 / The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control10..1
BindingThe codes SHOULD be taken from For codes, see JP Core Medication MERIT9 Unit ValueSet
(preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationUnitMERIT9_VS)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Ratio.denominator
Definition

単位時間


分母の値。 / The value of the denominator.

Short単位時間分母値 / Denominator value
Control0..1
TypeQuantity
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Ratio.denominator.value
Definition

単位時間


測定量の値。値には、値の表示に暗黙の精度が含まれます。 / The value of the measured amount. The value includes an implicit precision in the presentation of the value.

Short単位時間数値(暗黙の精度を持つ) / Numerical value (with implicit precision)
Comments

値の暗黙の精度は常に尊重されるべきです。金銭的価値には、精度を処理するための独自のルールがあります(標準的な会計の教科書を参照)。 / The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

Control0..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Ratio.denominator.comparator
Definition

値をどのように理解し、表現する必要があるか - 測定の問題により実際の値が記載されている値よりも大きいか小さいかどうか。例えばコンパレータが「<」の場合、実際の値は<stated値です。 / How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

Short<|<= |> = |> - 価値を理解する方法 / < | <= | >= | > - how to understand the value
Control0..1
BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
(required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

量を理解し、表現する方法。 / How the Quantity should be understood and represented.

Typecode
Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

測定方法の制限があるため、値が<5ug/Lまたは> 400mg/Lの測定値を処理するためのフレームワークが必要です。 / Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Ratio.denominator.unit
Definition

単位時間の単位。UCUMを使用する。


ユニットの人間の読み取り可能な形式。 / A human-readable form of the unit.

Short単位時間の単位ユニット表現 / Unit representation
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

測定単位には多くの表現があり、多くのコンテキストでは、特定の表現が固定され、必要です。すなわちマイクログラム用MCG。 / There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Ratio.denominator.system
Definition

UCUMを識別するURL。固定値。


ユニットのコード化された形式を提供するシステムの識別。 / The identification of the system that provides the coded form of the unit.

ShortUCUMを識別するURLコード化されたユニットフォームを定義するシステム / System that defines coded unit form
Control0..1
This element is affected by the following invariants: qty-3
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

ユニットのコード化された形式を定義するシステムを知る必要があります。 / Need to know the system that defines the coded form of the unit.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Ratio.denominator.code
Definition

一部のユニット表現システムのユニットのコンピューター処理可能な形式。 / A computer processable form of the unit in some unit representation system.

Shortユニットのコード化された形式 / Coded form of the unit
Comments

優先システムはUCUMですが、独自の単位にはSNOMED-CT、または通貨にISO 4217を使用することもできます。使用のコンテキストには、特定のシステムからのコードがさらに必要になる場合があります。 / The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

Control0..1
BindingThe codes SHOULD be taken from For codes, see UnitsOfTime
(preferred to http://hl7.org/fhir/ValueSet/units-of-time)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Ratio
Definition

単位時間内での薬剤の容量

Short単位時間内での薬剤の容量
Comments

比率データタイプは、関係を数量と共通単位を使用して適切に表現できない場合にのみ、2つの数値の関係を表現するために使用する必要があります。分母値が「1」に固定されていることが知られている場合、比率ではなく数量を使用する必要があります。 / The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: 分子と分母の両方が存在するか、両方が存在します。両方が欠席している場合、いくつかの拡張が存在するものとします / Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
2. Ratio.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Ratio.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Ratio.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Ratio.numerator
    Definition

    投与量

    Short投与量
    Comments

    薬剤に関する数量と単位を定めている。ValueおよびCodeを必須としている。単位についてはMERIT9医薬品単位略号の利用を推進している。(SHOULD)

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeQuantity(JP Core Medication Quantity DataType)
    Is Modifierfalse
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qty-3: ユニットのコードが存在する場合、システムも存在するものとします / If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
    8. Ratio.numerator.id
    Definition

    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    Short要素間参照のための一意のID / Unique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    10. Ratio.numerator.extension
    Definition

    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Ratio.numerator.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 12. Ratio.numerator.value
      Definition

      投与量

      Short投与量
      Comments

      暗示された精度については常に尊重すべきである。貨幣計算では制度に関する独自のルールがある(会計についての標準的な教科書を参照すること)。

      Control1..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Ratio.numerator.comparator
      Definition

      実際の値が計測して示された値よりも大きいのか小さいのかなど、値がどのように解釈され、表現されるのかを示している。たとえば、もし、comparatorエレメントが"<"であれば、実際の値は示された値よりも小さい(<)。

      Short< | <= | >= | > - 値の解釈法
      Comments

      FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

      Control0..1
      BindingThe codes SHALL be taken from QuantityComparator
      (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

      量を理解し、表現する方法。 / How the Quantity should be understood and represented.

      Typecode
      Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      計測法に制限があって値が<5ug/L や >400mg/L として示されるような場合でも値を扱えるようなフレームワークが必要である。

      Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Ratio.numerator.unit
      Definition

      投与量の単位。

      Short投与量の単位
      Comments

      FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      コンテキストによってさまざまな単位の表現がある。固定された特定の表現が求められることがある。たとえば、mcgはmicrogramを表す。

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Ratio.numerator.system
      Definition

      単位をコード化して表現するシステムについてのID。

      Shortコード化された単位表現を規定するシステム
      Comments

      以下参照。 http://en.wikipedia.org/wiki/Uniform_resource_identifier

      Control0..1
      This element is affected by the following invariants: qty-3
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      システムによって定義される単位のコードを把握しておく必要がある。

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Ratio.numerator.code
      Definition

      単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨(SHOULD)

      Short単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨
      Comments

      単位のコード化された形式、【JP Core仕様】MERIT9医薬品単位略号マスタコードを推奨(SHOULD)されるが、ローカルコード等を利用することも可能とする

      Control1..1
      BindingThe codes SHOULD be taken from JP Core Medication MERIT9 Unit ValueSet
      (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationUnitMERIT9_VS)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Ratio.denominator
      Definition

      単位時間

      Short単位時間
      Control0..1
      TypeQuantity
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Ratio.denominator.id
      Definition

      リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Short要素間参照のための一意のID / Unique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      26. Ratio.denominator.extension
      Definition

      要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      Short実装で定義された追加のコンテンツ / Additional content defined by implementations
      Comments

      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Ratio.denominator.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 28. Ratio.denominator.value
        Definition

        単位時間

        Short単位時間
        Comments

        値の暗黙の精度は常に尊重されるべきです。金銭的価値には、精度を処理するための独自のルールがあります(標準的な会計の教科書を参照)。 / The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Ratio.denominator.comparator
        Definition

        値をどのように理解し、表現する必要があるか - 測定の問題により実際の値が記載されている値よりも大きいか小さいかどうか。例えばコンパレータが「<」の場合、実際の値は<stated値です。 / How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

        Short<|<= |> = |> - 価値を理解する方法 / < | <= | >= | > - how to understand the value
        Control0..1
        BindingThe codes SHALL be taken from QuantityComparator
        (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

        量を理解し、表現する方法。 / How the Quantity should be understood and represented.

        Typecode
        Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        測定方法の制限があるため、値が<5ug/Lまたは> 400mg/Lの測定値を処理するためのフレームワークが必要です。 / Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

        Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Ratio.denominator.unit
        Definition

        単位時間の単位。UCUMを使用する。

        Short単位時間の単位
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        測定単位には多くの表現があり、多くのコンテキストでは、特定の表現が固定され、必要です。すなわちマイクログラム用MCG。 / There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Ratio.denominator.system
        Definition

        UCUMを識別するURL。固定値。

        ShortUCUMを識別するURL
        Control0..1
        This element is affected by the following invariants: qty-3
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        ユニットのコード化された形式を定義するシステムを知る必要があります。 / Need to know the system that defines the coded form of the unit.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Ratio.denominator.code
        Definition

        一部のユニット表現システムのユニットのコンピューター処理可能な形式。 / A computer processable form of the unit in some unit representation system.

        Shortユニットのコード化された形式 / Coded form of the unit
        Comments

        優先システムはUCUMですが、独自の単位にはSNOMED-CT、または通貨にISO 4217を使用することもできます。使用のコンテキストには、特定のシステムからのコードがさらに必要になる場合があります。 / The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

        Control0..1
        BindingThe codes SHOULD be taken from UnitsOfTime
        (preferred to http://hl7.org/fhir/ValueSet/units-of-time)
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))