HL7 FHIR JP Core ImplementationGuide
2.0.0-dev - ci-build
HL7 FHIR JP Core ImplementationGuide
2.0.0-dev - ci-build
HL7 FHIR JP Core ImplementationGuide - Local Development build (v2.0.0-dev) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
| Active as of 2023-10-31 |
Definitions for the jp-medicationrange-unitoftime data type profile.
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | 範囲指定された時間の上限下限 A set of ordered Quantities defined by a low and high limit. |
| Short | 範囲指定された時間の上限下限Set of values bounded by low and high |
| Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters) rng-2: If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high)) |
| 2. Range.low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | 時間範囲（下限）Low limit |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 4. Range.low.value | |
| Definition | 時間範囲（下限） The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | 時間範囲（下限）Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 0..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 6. Range.low.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0) |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 8. Range.low.unit | |
| Definition | A human-readable form of the unit. |
| Short | 単位時間の単位Unit representation |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Range.low.system | |
| Definition | UCUMを識別するURL。固定値。 The identification of the system that provides the coded form of the unit. |
| Short | UCUMを識別するURLSystem that defines coded unit form |
| Control | 0..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Range.low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from For codes, see UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 14. Range.high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | 時間範囲（上限）High limit |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Range.high.value | |
| Definition | 時間範囲（上限） The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | 時間範囲（上限）Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 0..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Range.high.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0) |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Range.high.unit | |
| Definition | A human-readable form of the unit. |
| Short | 単位時間の単位Unit representation |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Range.high.system | |
| Definition | UCUMを識別するURL。固定値。 The identification of the system that provides the coded form of the unit. |
| Short | UCUMを識別するURLSystem that defines coded unit form |
| Control | 0..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Range.high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from For codes, see UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | 範囲指定された時間の上限下限 |
| Short | 範囲指定された時間の上限下限 |
| Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 |
| 2. Range.low | |
| Short | 時間範囲（下限） |
| 4. Range.low.value | |
| Definition | 時間範囲（下限） |
| Short | 時間範囲（下限） |
| 6. Range.low.unit | |
| Short | 単位時間の単位 |
| 8. Range.low.system | |
| Definition | UCUMを識別するURL。固定値。 |
| Short | UCUMを識別するURL |
| 10. Range.low.code | |
| Binding | The codes SHOULD be taken from UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
| 12. Range.high | |
| Short | 時間範囲（上限） |
| 14. Range.high.value | |
| Definition | 時間範囲（上限） |
| Short | 時間範囲（上限） |
| 16. Range.high.unit | |
| Short | 単位時間の単位 |
| 18. Range.high.system | |
| Definition | UCUMを識別するURL。固定値。 |
| Short | UCUMを識別するURL |
| 20. Range.high.code | |
| Binding | The codes SHOULD be taken from UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
Guidance on how to interpret the contents of this table can be found here
| 0. Range | |
| Definition | 範囲指定された時間の上限下限 |
| Short | 範囲指定された時間の上限下限 |
| Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)rng-2: If present, low SHALL have a lower value than high ( low.empty() or high.empty() or (low <= high)) |
| 2. Range.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Range.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Range.low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | 時間範囲（下限） |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 8. Range.low.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Range.low.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.low.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Range.low.value | |
| Definition | 時間範囲（下限） |
| Short | 時間範囲（下限） |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 0..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 14. Range.low.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0) |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Range.low.unit | |
| Definition | A human-readable form of the unit. |
| Short | 単位時間の単位 |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Range.low.system | |
| Definition | UCUMを識別するURL。固定値。 |
| Short | UCUMを識別するURL |
| Control | 0..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Range.low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Range.high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | 時間範囲（上限） |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Range.high.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 26. Range.high.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Range.high.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 28. Range.high.value | |
| Definition | 時間範囲（上限） |
| Short | 時間範囲（上限） |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 0..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Range.high.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.3.0) |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Range.high.unit | |
| Definition | A human-readable form of the unit. |
| Short | 単位時間の単位 |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Range.high.system | |
| Definition | UCUMを識別するURL。固定値。 |
| Short | UCUMを識別するURL |
| Control | 0..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Range.high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from UnitsOfTime (preferred to http://hl7.org/fhir/ValueSet/units-of-time) |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |