HL7 FHIR JP Core ImplementationGuide
2.0.0-dev - ci-build Japan flag

HL7 FHIR JP Core ImplementationGuide - Local Development build (v2.0.0-dev) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: JP_Location - Detailed Descriptions

Active as of 2023-10-31

Definitions for the jp-location resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Location
Definition

サービスが提供され、リソースとそれに関わる人たちが存在する物理的な場所の詳細情報と位置情報。


Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

Short物理的な場所の詳細情報と位置情報Details and position information for a physical place
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Location.identifier
Definition

ユーザに場所を特定する一意のコードまたは番号


Unique code or number identifying the location to its users.

Shortユーザに場所を特定する一意のコードまたは番号Unique code or number identifying the location to its users
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

登記内の組織ラベルの場所。これらを追跡する必要がある。


Organization label locations in registries, need to keep track of those.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Location.status
Definition

statusプロパティは、operationStatus、またはロケーションに構成されている場合はスケジュール/スロットによってカバーされる可能性がある現在の値ではなく、リソースの一般的な可用性をカバーする。


The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

Shortactive | suspended | inactive / アクティブ|中断|非アクティブ
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

Control0..1
BindingThe codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|4.3.0
(required to http://hl7.org/fhir/ValueSet/location-status|4.3.0)

Indicates whether the location is still in use.

Typecode
Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Location.operationalStatus
Definition

稼働状況には、ベッドに最も関連する稼働値が含まれる(ただし、隔離ユニット/透析椅子などの部屋/ユニット/椅子などにも適用できる)。これは通常、汚染、ハウスキーピング、およびメンテナンスなどの他のアクティビティなどの概念をカバーしている。


The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

Shortロケーションの運用ステータス(通常、ベッド/部屋のみ)The operational status of the location (typically only for a bed/room)
Comments

コードは、SNOMED CTなどの非常に形式的な定義まで、列挙またはコードリストで非常にカジュアルに定義できる。詳細については、HL7 v3コア原則を参照すること。

Control0..1
BindingThe codes SHOULD be taken from hl7VS-bedStatushttp://terminology.hl7.org/ValueSet/v2-0116
(preferred to http://terminology.hl7.org/ValueSet/v2-0116)

The operational status if the location (where typically a bed/room).

TypeCoding
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.name
Definition

人間が使用する場所の名前。一意である必要はない。


Name of the location as used by humans. Does not need to be unique.

Short人間が使用する場所の名前Name of the location as used by humans
Comments

場所の名前が変更された場合は、古い名前をエイリアス列に入力して、検索で検索できるようにすることを検討すべきである。


If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Location.alias
Definition

その場所が過去に知られていた、または以前から知られていた別名のリスト


A list of alternate names that the location is known as, or was known as, in the past.

Shortその場所が過去に知られていた、または以前から知られていた別名のリストA list of alternate names that the location is known as, or was known as, in the past
Comments

エイリアス/歴史的な名前に関連付けられた日付はない。これは、名前がいつ使用されたかを追跡するためではなく、古い名前でも場所を特定できるように検索を支援するためのものである。


There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

「時間の経過とともに、場所や組織は多くの変化を遂げ、さまざまな名前で知られるようになる。
場所が知られている以前の名前を知っていることを検索することは非常に役に立つ。」


Over time locations and organizations go through many changes and can be known by different names.

For searching knowing previous names that the location was known by can be very useful.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Location.description
Definition

場所の説明。場所の検索や参照に役立つ。


Description of the Location, which helps in finding or referencing the place.

Short名前以外の場所を識別するための詳細情報として表示できる場所に関する追加の詳細Additional details about the location that could be displayed as further information to identify the location beyond its name
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

人間は、正しい場所が特定されたことを確認するために追加情報を必要とする。


Humans need additional information to verify a correct location has been identified.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Location.mode
Definition

リソースインスタンスが特定の場所を表すか、場所のクラスを表すかを示す。


Indicates whether a resource instance represents a specific location or a class of locations.

Shortinstance | kind / インスタンス|種類
Comments

ロケーションがロケーションのクラスであるかどうかによって、その使用方法と理解方法が変わるため、これは修飾子としてラベル付けされる。


This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

Control0..1
BindingThe codes SHALL be taken from LocationModehttp://hl7.org/fhir/ValueSet/location-mode|4.3.0
(required to http://hl7.org/fhir/ValueSet/location-mode|4.3.0)

Indicates whether a resource instance represents a specific location or a class of locations.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

スケジュールや順番に場所リソースを使用する場合、特定の場所ではなく場所のクラスを参照できる必要がある。


When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Location.type
Definition

その場所で実行される機能のタイプを示す。


Indicates the type of function performed at the location.

Short実行される機能のタイプType of function performed
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。場合によっては、モデルはCodeableConceptを使用せず、コーディングを直接使用して、テキスト、コーディング、翻訳、および要素と前後の調整間の関係を管理するための独自の構造を提供する必要がある。

Control0..*
BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleTypehttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType
(extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

Indicates the type of function performed at the location.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Location.telecom
Definition

その場所で利用可能な通信機器の連絡先。これには、電話番号、ファックス番号、携帯電話番号、電子メールアドレス、ウェブサイトなどが含まれる。


The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

Short所在地の連絡先Contact details of the location
Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Location.address
Definition

物理的な場所。


Physical location.

Short物理的な場所Physical location
Comments

追加のアドレスは、Location リソースの別のインスタンスを使用して記録するか、Organization を介して記録する必要がある。


Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

Control0..1
TypeAddress
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

場所が訪問できる場合は、住所を把握しておく必要がある。


If locations can be visited, we need to keep track of their address.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Location.physicalType
Definition

場所の物理的な形、例えば建物、部屋、車両、道路。


Physical form of the location, e.g. building, room, vehicle, road.

Short場所の物理的な形態Physical form of the location
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。いくつかのケースでは、モデルはCodeableConceptを使用せず、Codingを直接使用し、テキスト、コーディング、翻訳、要素間の関係、および前後の調整を管理するための独自の構造を提供することが望ましい。

Control0..1
BindingFor example codes, see LocationTypehttp://hl7.org/fhir/ValueSet/location-physical-type
(example to http://hl7.org/fhir/ValueSet/location-physical-type)

Physical form of the location.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

クエリで関連する場所を表示するためには、場所を分類する必要がある。


For purposes of showing relevant locations in queries, we need to categorize locations.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Location.position
Definition

WGS84 データム(KML で使用されている座標系と同じ)を用いて表現された Location の絶対地理的位置。


The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

Short絶対的な地理的位置The absolute geographic location
Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

モバイルアプリケーションや自動化されたルート検索では、位置情報の正確な位置を知る必要がある。


For mobile applications and automated route-finding knowing the exact location of the Location is required.

Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
30. Location.position.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Location.position.longitude
Definition

経度。値の領域及び解釈は、KML の longitude 要素のテキストと同様である(後述)。


Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

ShortWGS84データの経度Longitude with WGS84 datum
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.position.latitude
Definition

緯度。値領域及び解釈は、KML の latitude 要素のテキストと同様である(後述)。


Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

ShortWGS84データの緯度Latitude with WGS84 datum
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.position.altitude
Definition

高度。値領域及び解釈は、KML の altitude 要素のテキストと同様である(後述)。


Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).

ShortWGS84データによる高度Altitude with WGS84 datum
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control0..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.managingOrganization
Definition

場所のプロビジョニングと維持管理を担当する組織。


The organization responsible for the provisioning and upkeep of the location.

Shortプロビジョニングと維持管理を担当する組織Organization responsible for provisioning and upkeep
Comments

これは、この場所がサービスを提供する組織階層の一部として使用することもできる。これらのサービスは、HealthcareServiceリソースを介して定義することができる。


This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

Control0..1
TypeReference(JP Core Organization Profile, Organization)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

場所を管理している人を知る必要がある。


Need to know who manages the location.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.partOf
Definition

この場所が物理的に存在するもう一つの場所。


Another Location of which this Location is physically a part of.

Shortこの場所が物理的に存在するもう一つの場所Another Location this one is physically a part of
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

Control0..1
TypeReference(JP Core Location Profile, Location)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

位置情報、表示、識別のためには、他のどの場所の内部にどの場所があるかを知ることが重要である。


For purposes of location, display and identification, knowing which locations are located within other locations is important.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Location.hoursOfOperation
Definition

この場所が週に何日あるいは何時間オープンしているか。


What days/times during a week is this location usually open.

Shortこの場所は通常、1週間のうち何日/時間帯に営業しているWhat days/times during a week is this location usually open
Comments

この種の情報は、一般的にディレクトリやウェブサイトに掲載されており、施設が利用可能な時間帯を顧客に通知している。
その場所の特定のサービスは、その場所の時間よりも短い(または長い)独自の時間を持っている場合がある。


This type of information is commonly found published in directories and on websites informing customers when the facility is available.

Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
44. Location.hoursOfOperation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Location.hoursOfOperation.daysOfWeek
Definition

開始時刻と終了時刻の間に利用可能な曜日を示す。


Indicates which days of the week are available between the start and end Times.

Shortmon | tue | wed | thu | fri | sat | sun / 月|火|水|木|金|土|日
Comments

FHIR文字列のサイズは1MBを超えてはならないことに注意すること。

Control0..*
BindingThe codes SHALL be taken from DaysOfWeekhttp://hl7.org/fhir/ValueSet/days-of-week|4.3.0
(required to http://hl7.org/fhir/ValueSet/days-of-week|4.3.0)

The days of the week.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Location.hoursOfOperation.allDay
Definition

その場所は終日営業している。


The Location is open all day.

Shortその場所は終日営業しているThe Location is open all day
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Location.hoursOfOperation.openingTime
Definition

場所が開く時間


Time that the Location opens.

Short場所が開く時間Time that the Location opens
Control0..1
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Location.hoursOfOperation.closingTime
Definition

場所が閉まる時間


Time that the Location closes.

Short場所が閉まる時間Time that the Location closes
Control0..1
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Location.availabilityExceptions
Definition

場所が私たちのものを開くときの説明は、通常、例えば、祝日の可用性とは異なる。
営業時間に詳細な通常のサイトの利用可能性のすべての可能性のある例外を簡潔に説明する。


A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.

Short利用可能の例外についての説明Description of availability exceptions
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Location.endpoint
Definition

場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイント。


Technical endpoints providing access to services operated for the location.

Short場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイントTechnical endpoints providing access to services operated for the location
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

Control0..*
TypeReference(Endpoint)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

組織は、さまざまなサービスを提供するさまざまな場所に異なるシステムを持っている可能性があり、それらに接続する方法や目的のための技術的な接続の詳細を定義できる必要がある。


Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Location
Definition

サービスが提供され、リソースとそれに関わる人たちが存在する物理的な場所の詳細情報と位置情報。

Short物理的な場所の詳細情報と位置情報
2. Location.identifier
Definition

ユーザに場所を特定する一意のコードまたは番号

Shortユーザに場所を特定する一意のコードまたは番号
NoteThis is a business identifier, not a resource identifier (see discussion)
Requirements

登記内の組織ラベルの場所。これらを追跡する必要がある。

4. Location.status
Definition

statusプロパティは、operationStatus、またはロケーションに構成されている場合はスケジュール/スロットによってカバーされる可能性がある現在の値ではなく、リソースの一般的な可用性をカバーする。

Shortactive | suspended | inactive / アクティブ|中断|非アクティブ
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

6. Location.operationalStatus
Definition

稼働状況には、ベッドに最も関連する稼働値が含まれる(ただし、隔離ユニット/透析椅子などの部屋/ユニット/椅子などにも適用できる)。これは通常、汚染、ハウスキーピング、およびメンテナンスなどの他のアクティビティなどの概念をカバーしている。

Shortロケーションの運用ステータス(通常、ベッド/部屋のみ)
Comments

コードは、SNOMED CTなどの非常に形式的な定義まで、列挙またはコードリストで非常にカジュアルに定義できる。詳細については、HL7 v3コア原則を参照すること。

8. Location.name
Definition

人間が使用する場所の名前。一意である必要はない。

Short人間が使用する場所の名前
Comments

場所の名前が変更された場合は、古い名前をエイリアス列に入力して、検索で検索できるようにすることを検討すべきである。

10. Location.alias
Definition

その場所が過去に知られていた、または以前から知られていた別名のリスト

Shortその場所が過去に知られていた、または以前から知られていた別名のリスト
Comments

エイリアス/歴史的な名前に関連付けられた日付はない。これは、名前がいつ使用されたかを追跡するためではなく、古い名前でも場所を特定できるように検索を支援するためのものである。

Requirements

「時間の経過とともに、場所や組織は多くの変化を遂げ、さまざまな名前で知られるようになる。
場所が知られている以前の名前を知っていることを検索することは非常に役に立つ。」

12. Location.description
Definition

場所の説明。場所の検索や参照に役立つ。

Short名前以外の場所を識別するための詳細情報として表示できる場所に関する追加の詳細
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

Requirements

人間は、正しい場所が特定されたことを確認するために追加情報を必要とする。

14. Location.mode
Definition

リソースインスタンスが特定の場所を表すか、場所のクラスを表すかを示す。

Shortinstance | kind / インスタンス|種類
Comments

ロケーションがロケーションのクラスであるかどうかによって、その使用方法と理解方法が変わるため、これは修飾子としてラベル付けされる。

Requirements

スケジュールや順番に場所リソースを使用する場合、特定の場所ではなく場所のクラスを参照できる必要がある。

16. Location.type
Definition

その場所で実行される機能のタイプを示す。

Short実行される機能のタイプ
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。場合によっては、モデルはCodeableConceptを使用せず、コーディングを直接使用して、テキスト、コーディング、翻訳、および要素と前後の調整間の関係を管理するための独自の構造を提供する必要がある。

18. Location.telecom
Definition

その場所で利用可能な通信機器の連絡先。これには、電話番号、ファックス番号、携帯電話番号、電子メールアドレス、ウェブサイトなどが含まれる。

Short所在地の連絡先
20. Location.address
Definition

物理的な場所。

Short物理的な場所
Comments

追加のアドレスは、Location リソースの別のインスタンスを使用して記録するか、Organization を介して記録する必要がある。

Requirements

場所が訪問できる場合は、住所を把握しておく必要がある。

22. Location.physicalType
Definition

場所の物理的な形、例えば建物、部屋、車両、道路。

Short場所の物理的な形態
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。いくつかのケースでは、モデルはCodeableConceptを使用せず、Codingを直接使用し、テキスト、コーディング、翻訳、要素間の関係、および前後の調整を管理するための独自の構造を提供することが望ましい。

Requirements

クエリで関連する場所を表示するためには、場所を分類する必要がある。

24. Location.position
Definition

WGS84 データム(KML で使用されている座標系と同じ)を用いて表現された Location の絶対地理的位置。

Short絶対的な地理的位置
Requirements

モバイルアプリケーションや自動化されたルート検索では、位置情報の正確な位置を知る必要がある。

26. Location.position.longitude
Definition

経度。値の領域及び解釈は、KML の longitude 要素のテキストと同様である(後述)。

ShortWGS84データの経度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

28. Location.position.latitude
Definition

緯度。値領域及び解釈は、KML の latitude 要素のテキストと同様である(後述)。

ShortWGS84データの緯度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

30. Location.position.altitude
Definition

高度。値領域及び解釈は、KML の altitude 要素のテキストと同様である(後述)。

ShortWGS84データによる高度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

32. Location.managingOrganization
Definition

場所のプロビジョニングと維持管理を担当する組織。

Shortプロビジョニングと維持管理を担当する組織
Comments

これは、この場所がサービスを提供する組織階層の一部として使用することもできる。これらのサービスは、HealthcareServiceリソースを介して定義することができる。

TypeReference(JP Core Organization Profile)
Requirements

場所を管理している人を知る必要がある。

34. Location.partOf
Definition

この場所が物理的に存在するもう一つの場所。

Shortこの場所が物理的に存在するもう一つの場所
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

TypeReference(JP Core Location Profile)
Requirements

位置情報、表示、識別のためには、他のどの場所の内部にどの場所があるかを知ることが重要である。

36. Location.hoursOfOperation
Definition

この場所が週に何日あるいは何時間オープンしているか。

Shortこの場所は通常、1週間のうち何日/時間帯に営業している
Comments

この種の情報は、一般的にディレクトリやウェブサイトに掲載されており、施設が利用可能な時間帯を顧客に通知している。
その場所の特定のサービスは、その場所の時間よりも短い(または長い)独自の時間を持っている場合がある。

38. Location.hoursOfOperation.daysOfWeek
Definition

開始時刻と終了時刻の間に利用可能な曜日を示す。

Shortmon | tue | wed | thu | fri | sat | sun / 月|火|水|木|金|土|日
Comments

FHIR文字列のサイズは1MBを超えてはならないことに注意すること。

40. Location.hoursOfOperation.allDay
Definition

その場所は終日営業している。

Shortその場所は終日営業している
42. Location.hoursOfOperation.openingTime
Definition

場所が開く時間

Short場所が開く時間
44. Location.hoursOfOperation.closingTime
Definition

場所が閉まる時間

Short場所が閉まる時間
46. Location.availabilityExceptions
Definition

場所が私たちのものを開くときの説明は、通常、例えば、祝日の可用性とは異なる。
営業時間に詳細な通常のサイトの利用可能性のすべての可能性のある例外を簡潔に説明する。

Short利用可能の例外についての説明
48. Location.endpoint
Definition

場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイント。

Short場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイント
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

Requirements

組織は、さまざまなサービスを提供するさまざまな場所に異なるシステムを持っている可能性があり、それらに接続する方法や目的のための技術的な接続の詳細を定義できる必要がある。

Guidance on how to interpret the contents of this table can be found here

0. Location
Definition

サービスが提供され、リソースとそれに関わる人たちが存在する物理的な場所の詳細情報と位置情報。

Short物理的な場所の詳細情報と位置情報
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where(((id.exists() and ('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url)))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(uri) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. Location.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Location.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

IETF language tag

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Location.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Invariantsdom-r4b: Containing new R4B resources within R4 resources may cause interoperability issues if instances are shared with R4 systems (($this is Citation or $this is Evidence or $this is EvidenceReport or $this is EvidenceVariable or $this is MedicinalProductDefinition or $this is PackagedProductDefinition or $this is AdministrableProductDefinition or $this is Ingredient or $this is ClinicalUseDefinition or $this is RegulatedAuthorization or $this is SubstanceDefinition or $this is SubscriptionStatus or $this is SubscriptionTopic) implies (%resource is Citation or %resource is Evidence or %resource is EvidenceReport or %resource is EvidenceVariable or %resource is MedicinalProductDefinition or %resource is PackagedProductDefinition or %resource is AdministrableProductDefinition or %resource is Ingredient or %resource is ClinicalUseDefinition or %resource is RegulatedAuthorization or %resource is SubstanceDefinition or %resource is SubscriptionStatus or %resource is SubscriptionTopic))
14. Location.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Location.identifier
Definition

ユーザに場所を特定する一意のコードまたは番号

Shortユーザに場所を特定する一意のコードまたは番号
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

登記内の組織ラベルの場所。これらを追跡する必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Location.status
Definition

statusプロパティは、operationStatus、またはロケーションに構成されている場合はスケジュール/スロットによってカバーされる可能性がある現在の値ではなく、リソースの一般的な可用性をカバーする。

Shortactive | suspended | inactive / アクティブ|中断|非アクティブ
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

Control0..1
BindingThe codes SHALL be taken from LocationStatus
(required to http://hl7.org/fhir/ValueSet/location-status|4.3.0)

Indicates whether the location is still in use.

Typecode
Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Location.operationalStatus
Definition

稼働状況には、ベッドに最も関連する稼働値が含まれる(ただし、隔離ユニット/透析椅子などの部屋/ユニット/椅子などにも適用できる)。これは通常、汚染、ハウスキーピング、およびメンテナンスなどの他のアクティビティなどの概念をカバーしている。

Shortロケーションの運用ステータス(通常、ベッド/部屋のみ)
Comments

コードは、SNOMED CTなどの非常に形式的な定義まで、列挙またはコードリストで非常にカジュアルに定義できる。詳細については、HL7 v3コア原則を参照すること。

Control0..1
BindingThe codes SHOULD be taken from hl7VS-bedStatus
(preferred to http://terminology.hl7.org/ValueSet/v2-0116)

The operational status if the location (where typically a bed/room).

TypeCoding
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Location.name
Definition

人間が使用する場所の名前。一意である必要はない。

Short人間が使用する場所の名前
Comments

場所の名前が変更された場合は、古い名前をエイリアス列に入力して、検索で検索できるようにすることを検討すべきである。

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Location.alias
Definition

その場所が過去に知られていた、または以前から知られていた別名のリスト

Shortその場所が過去に知られていた、または以前から知られていた別名のリスト
Comments

エイリアス/歴史的な名前に関連付けられた日付はない。これは、名前がいつ使用されたかを追跡するためではなく、古い名前でも場所を特定できるように検索を支援するためのものである。

Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

「時間の経過とともに、場所や組織は多くの変化を遂げ、さまざまな名前で知られるようになる。
場所が知られている以前の名前を知っていることを検索することは非常に役に立つ。」

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Location.description
Definition

場所の説明。場所の検索や参照に役立つ。

Short名前以外の場所を識別するための詳細情報として表示できる場所に関する追加の詳細
Comments

FHIR文字列はサイズが1MBを超えてはならないことに注意すること

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

人間は、正しい場所が特定されたことを確認するために追加情報を必要とする。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Location.mode
Definition

リソースインスタンスが特定の場所を表すか、場所のクラスを表すかを示す。

Shortinstance | kind / インスタンス|種類
Comments

ロケーションがロケーションのクラスであるかどうかによって、その使用方法と理解方法が変わるため、これは修飾子としてラベル付けされる。

Control0..1
BindingThe codes SHALL be taken from LocationMode
(required to http://hl7.org/fhir/ValueSet/location-mode|4.3.0)

Indicates whether a resource instance represents a specific location or a class of locations.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

スケジュールや順番に場所リソースを使用する場合、特定の場所ではなく場所のクラスを参照できる必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Location.type
Definition

その場所で実行される機能のタイプを示す。

Short実行される機能のタイプ
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。場合によっては、モデルはCodeableConceptを使用せず、コーディングを直接使用して、テキスト、コーディング、翻訳、および要素と前後の調整間の関係を管理するための独自の構造を提供する必要がある。

Control0..*
BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleType
(extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

Indicates the type of function performed at the location.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.telecom
Definition

その場所で利用可能な通信機器の連絡先。これには、電話番号、ファックス番号、携帯電話番号、電子メールアドレス、ウェブサイトなどが含まれる。

Short所在地の連絡先
Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.address
Definition

物理的な場所。

Short物理的な場所
Comments

追加のアドレスは、Location リソースの別のインスタンスを使用して記録するか、Organization を介して記録する必要がある。

Control0..1
TypeAddress
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

場所が訪問できる場合は、住所を把握しておく必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.physicalType
Definition

場所の物理的な形、例えば建物、部屋、車両、道路。

Short場所の物理的な形態
Comments

すべての用語の使用がこの一般的なパターンに適合するわけではない。いくつかのケースでは、モデルはCodeableConceptを使用せず、Codingを直接使用し、テキスト、コーディング、翻訳、要素間の関係、および前後の調整を管理するための独自の構造を提供することが望ましい。

Control0..1
BindingFor example codes, see LocationType
(example to http://hl7.org/fhir/ValueSet/location-physical-type)

Physical form of the location.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

クエリで関連する場所を表示するためには、場所を分類する必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.position
Definition

WGS84 データム(KML で使用されている座標系と同じ)を用いて表現された Location の絶対地理的位置。

Short絶対的な地理的位置
Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

モバイルアプリケーションや自動化されたルート検索では、位置情報の正確な位置を知る必要がある。

Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
42. Location.position.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. Location.position.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Location.position.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Location.position.longitude
Definition

経度。値の領域及び解釈は、KML の longitude 要素のテキストと同様である(後述)。

ShortWGS84データの経度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Location.position.latitude
Definition

緯度。値領域及び解釈は、KML の latitude 要素のテキストと同様である(後述)。

ShortWGS84データの緯度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control1..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Location.position.altitude
Definition

高度。値領域及び解釈は、KML の altitude 要素のテキストと同様である(後述)。

ShortWGS84データによる高度
Comments

IEEE型の浮動小数点型は使用せず、真の10進数のように動作し、精度が組み込まれているものを使用すること(例:JavaのBigInteger)。

Control0..1
Typedecimal
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Location.managingOrganization
Definition

場所のプロビジョニングと維持管理を担当する組織。

Shortプロビジョニングと維持管理を担当する組織
Comments

これは、この場所がサービスを提供する組織階層の一部として使用することもできる。これらのサービスは、HealthcareServiceリソースを介して定義することができる。

Control0..1
TypeReference(JP Core Organization Profile)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

場所を管理している人を知る必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Location.partOf
Definition

この場所が物理的に存在するもう一つの場所。

Shortこの場所が物理的に存在するもう一つの場所
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

Control0..1
TypeReference(JP Core Location Profile)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

位置情報、表示、識別のためには、他のどの場所の内部にどの場所があるかを知ることが重要である。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Location.hoursOfOperation
Definition

この場所が週に何日あるいは何時間オープンしているか。

Shortこの場所は通常、1週間のうち何日/時間帯に営業している
Comments

この種の情報は、一般的にディレクトリやウェブサイトに掲載されており、施設が利用可能な時間帯を顧客に通知している。
その場所の特定のサービスは、その場所の時間よりも短い(または長い)独自の時間を持っている場合がある。

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters)
60. Location.hoursOfOperation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
62. Location.hoursOfOperation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Location.hoursOfOperation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Location.hoursOfOperation.daysOfWeek
Definition

開始時刻と終了時刻の間に利用可能な曜日を示す。

Shortmon | tue | wed | thu | fri | sat | sun / 月|火|水|木|金|土|日
Comments

FHIR文字列のサイズは1MBを超えてはならないことに注意すること。

Control0..*
BindingThe codes SHALL be taken from DaysOfWeek
(required to http://hl7.org/fhir/ValueSet/days-of-week|4.3.0)

The days of the week.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Location.hoursOfOperation.allDay
Definition

その場所は終日営業している。

Shortその場所は終日営業している
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Location.hoursOfOperation.openingTime
Definition

場所が開く時間

Short場所が開く時間
Control0..1
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Location.hoursOfOperation.closingTime
Definition

場所が閉まる時間

Short場所が閉まる時間
Control0..1
Typetime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Location.availabilityExceptions
Definition

場所が私たちのものを開くときの説明は、通常、例えば、祝日の可用性とは異なる。
営業時間に詳細な通常のサイトの利用可能性のすべての可能性のある例外を簡潔に説明する。

Short利用可能の例外についての説明
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Location.endpoint
Definition

場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイント。

Short場所のために運営されているサービスへのアクセスを提供する技術的なエンドポイント
Comments

参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

Control0..*
TypeReference(Endpoint)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

組織は、さまざまなサービスを提供するさまざまな場所に異なるシステムを持っている可能性があり、それらに接続する方法や目的のための技術的な接続の詳細を定義できる必要がある。

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
本実装ガイドへのご質問・ご指摘については、GitHub IssueおよびGitHub PullRequestにて受け付けております。